Vestil PDSC-350-62 Bruksanvisning

Les nedenfor 📖 manual på norsk for Vestil PDSC-350-62 (23 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/23
PDSC-350-62, Manual
Copyright 2020 Vestil Manufacturing Corp.
Page 1 of 22
PDSC-350-62 POWERED STAIR-CLIMBER
OPERATION AND MAINTENANCE MANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered during the inspection,
immediately
record a complete description of the damage on the bill of lading. If the product is
undamaged, discard the packaging.
NOTES
:
1) Complian
ce with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) Information provided on labels affixed to the product.
Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: sales@vestil.com
PDSC-350-62, Manual
Copyright 2020 Vestil Manufacturing Corp.
PRODUCT INTRODUCTION
Specifications appear in the table below:
Vestil Manufacturing Corp. created this manual to acquaint owners and users of our electric stair climber
with safe operation and maintenance procedures. Employers are responsible for instructing employees to
use the product properly. Employees and any other persons, who might foreseeably use, repair,
or perform maintenance on the stair climber must read and understand every instruction BEFORE using
the device. Stacker operators should have access to the manual at all times and should review the
directions before each use. Contact Vestil for answers to any question you have after reading the entire
manual.
Although Vestil diligently strives to identify foreseeable hazardous situations, this manual cannot address
every conceivable danger. The end-user is ultimately responsible for exercising sound judgment at all times.
SAFETY PRINCIPLES
Vestil Manufacturing Corp. recognizes the critical importance of workplace safety. Each person who might
participate in operation or maintenance of the product must read this manual. Read the entire manual and fully
understand the directions
BEFORE using or performing maintenance on the stacker. If you do
not understand any instructions, contact Vestil for clarification. Failure to adhere to the directions
in this manual might lead to serious personal injury or even death.
Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply the safe
operation and maintenance procedures explained in this manual or that appear on labels affixed to the product.
Furthermore, failure to exercise good judgment and common sense may result in property damage, serious
personal injury, or death, and also are not the responsibility of Vestil.
This manual applies the hazard identification methods suggested for instruction manuals by the American
National Standards Institute (ANSI). In accordance with ANSI guidelines for hazard identification language, this
manual classifies personal injury risks and situations that could lead to property damage with SIGNAL WORDS.
These signal words announce an associated safety message. The reader must understand that the signal word
chosen indicates the seriousness of that hazard according to the following convention:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices not related to personal injury, such as operation that could damage the cart.
No safety alert symbol (equilateral triangle enclosing an exclamation point) accompanies this
signal word.
Thank you for purchasing Powered Stair Climber (PDSC-350-62) offered by Vestil
Manufacturing Corporation (“Vestil”). Despite the product’s relatively simple
mechanics, all personnel must familiarize themselves with the safe operation
instructions provided in this manual.
Page 2 of 22
PDSC-350-62, Manual
Copyright 2020 Vestil Manufacturing Corp.
SAFETY GUIDELINES
Failure to read and understand the instructions included in this manual before using or servicing
the stacker constitutes misuse of the product. Study the entire manual before you use the Climber for
the first time and before each subsequent use. Read the manual to refresh your understanding of the safe
use and maintenance procedures. If questions remain after you finish reading the manual, contact Vestil for
answers. DO NOT attempt to resolve any problem with the stacker unless you are certain that it will be safe to
use afterwards.
To decrease the risk of electrocution:
DO NOT contact or operate the climber close to electrified wires or other sources of electricity;
Before operating the Climber, always inspect the area where you will use it.
Improper use might result in serious personal injuries to the operator and/or bystanders. To
minimize the possibility of injury, ALL persons who might operate, perform maintenance on, or service the PDSC
must read, understand and apply the following instructions:
DO NOT operate the Climber unless and until you are:
1. Trained to use the machine; AND
2. Certified as a trained operator by your employer in accordance with U.S. OSHA regulations (29 CFR
§1910.178) and any standards incorporated by reference (e.g. ANSI/ITSDF B56.1-2005).
DO NOT attempt to transport loads that exceed the rated capacity.
Inspect the machine before each use; DO NOT use the Climber unless it is in normal condition. Normal
operating condition exists if PDSC passes the inspection and functions tests.
DO NOT use the unit until you read and understand the entire owner’s manual. Review the manual before
each use AND before performing maintenance on the device.
DO NOT use the Climber if the load-supporting elements sustain any structural damage. Structural elements
include, but are not limited to, the nose plate, frame, and wheels. If structural damage is present,
immediately tag the unit “Out of Service” and inform maintenance personnel of the problem.
DO NOT use the Climber if it makes unusual noises during operation.
DO NOT attempt to climb with unevenly distributed load. Always center, evenly distribute and secure load with
the frame
Before initial operation, check the electronic functions, safety brakes and position of the clmibing
wheel
DO NOT overload the unit.
Operator should be fully trained to operate the electric climber. Operator should be physically
experienced to handle the climber and load on the stair climber while moving up & down on the
stairs
Wear non-slip footwear and must operate unit with both hands
Practice operating PDSC without load and at low speed to start with. This will help operatior to get
familiar with the unit and how to operate the unit with load
Ensure load is secrued to frame with safety belt
Page 3 of 22

Produkspesifikasjoner

Merke: Vestil
Kategori: Ikke kategorisert
Modell: PDSC-350-62

Trenger du hjelp?

Hvis du trenger hjelp med Vestil PDSC-350-62 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Vestil Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer