Vestil VST-4-Y Bruksanvisning

Les nedenfor 📖 manual på norsk for Vestil VST-4-Y (10 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/10
TABLE OF CONTENTS Rev. 4/22/2022 VST-4-Y, MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 1 of 10
VST-4-Y
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered, record a
complete description of it on the bill of lading. If the product is undamaged, discard the
packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and
maintenance comply with laws, regulations, codes, and mandatory standards applied where
the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
Department can also be contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-manuals.php
.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Page
Signal Words……………………………………………….………………………………….…….…….......
2
Safety Instructions.……………………………………………………..……………………….….…..…..
2 - 3
Specifications…………………….……………………………………………………………………….….
3
Exploded View and Bill of Materials………..………………………………………………….………….
4
Assembling the Steps……………………………………………..…………………………….………..
5, 6, 7
Using the Steps……………………………………………………………………………………………..
7
Record of Satisfactory Condition……………………………..……………………………….…..………
8
Inspections & Maintenance…………………………………...…………………………………..……....
8
Labeling Diagram.…………...………………………………………..……………..................................
9
Limited Warranty…………………………………………….…………………………………………….....
10
TABLE OF CONTENTS Rev. 4/22/2022 VST-4-Y, MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 2 of 10
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-related
messages. The following are signal words used in this manual and their definitions.
SAFETY INSTRUCTIONS
Vestil strives to identify hazards associated with the use of its products, but no manual can address
every conceivable risk. Minimize the likelihood of injury by recognizing the hazards identified below and
by inspecting and maintaining the product as instructed in INSPECTIONS & MAINTNENANCE
on p. 8.
WARNING
Hazardous conditions could result in serious personal injuries or death.
Read and understand the entire manual before assembling, using, inspecting, or servicing the steps.
DO NOT use the steps unless you are in good health. NEVER use the steps while under the influence of
alcohol or drugs, including prescription medication that affects balance, perception, or judgment.
DO NOT exceed the capacity/rated load. The total weight applied to the stepstool (weight of the
user plus tools, etc.) must not be greater than the capacity indicated on the riser of the top step (500 lb.;
227kg).
Do not use the unit if the steps are cracked, dented, or damaged in other ways. Do not use the unit
unless handrails are solidly fastened to the steps.
Wear appropriate footwear. DO NOT wear high-heeled shoes or footwear with smooth soles.
DO NOT use the steps on uneven, sloped, or unstable surfaces. ONLY use the steps on even, level,
improved surfaces (e.g. concrete or asphalt).
Make sure that you will not contact overhead objects during use.
Avoid electrical shock! Take precautions to prevent contact, or possible contact, with an energized,
electrical wire/cord.
Remove dirt and debris from your shoes before walking on the steps. Only wear slip-resistant shoes.
Only stand on the steps. DO NOT climb on the railing. DO NOT slide on the railing.
DO NOT step onto, or off of, any step from another elevated surface.
ALWAYS face the stairs and use the handrails while ascending and descending the stepstool.
DO NOT increase the height of a step by standing on other objects placed on one of the steps.
Inspect the steps as described in INSPECTIONS & MAINTENANCE on p. 8. DO NOT use the stool unless it
is in SATISFACTORY CONDITION. ONLY use manufacturer-approved replacement parts when repairs are
necessary. See RECORD OF SATISFACTORY CONDITION on p. 8.
DO NOT use the steps if 1 or more of the molded rubber feet (14-145-179) is significantly worn,
damaged, or missing. See EXPLODED VIEW on p. 4. Only use the steps if all 4 feet are in place and are in
SATISFACTORY CONDITION.
ONLY use the steps as standing surfaces. DO NOT use it for any other purpose. DO NOT store materials
or equipment on the steps. Always unload the steps before leaving them unattended.
DO NOT use the steps in front of a door unless the door is secured in an open position, is locked, is
attended, or is barricaded.
DO NOT lean, or reach, over the handrails/sides of the steps. Position the steps as close to the work as
possible. Reposition the steps to prevent overreaching. Overreaching could cause instability and result
in a fall.
Avoid sudden shifts while on the steps.
DO NOT skip steps. Climb the steps one step at a time.
DO NOT attempt to move the steps while someone is using them.
Continues on next page
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
!
!
!
!
TABLE OF CONTENTS Rev. 4/22/2022 VST-4-Y, MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 3 of 10
WARNING
Continued from p. 2.
DO NOT use the steps to transport people or objects. DO NOT ride on the steps while it is moved.
DO NOT remove or obscure any label or information molded into the steps. Each label and all molded
information must be in place, readable, & undamaged. See LABELING DIAGRAM on p. 9.
DO NOT modify this steps! Modifying the steps automatically voids the LIMITED WARRANTY (p. 10) and
might make the steps unsafe to use.
SPECIFICATIONS
Documents that provide specifications for VST series products are available online to anyone who
visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. To access
the appropriate specifications document, navigate to the BOL-R webpage at
https://www.vestil.com/product.php?FID=632
. Scroll the page to the entry for the specific model you
purchased. Click the button in the “PDF” column that looks like a pencil inside a blue-bordered box. A
PDF file will open. This file is the specifications document. Print a copy of the document and keep it with
your copy of this manual. If your model is not included on the
VST webpage, or if you cannot access
and/or print the specifications document, contact the TECHNICAL SERVICE DEPT. Contact information
for the department is provided on the cover page of this manual. The following is an exemplar
specifications document.
NOTE: 1IN. = 2.54CM; 2.2LB. = 1KG
!

Produkspesifikasjoner

Merke: Vestil
Kategori: Ikke kategorisert
Modell: VST-4-Y

Trenger du hjelp?

Hvis du trenger hjelp med Vestil VST-4-Y still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Vestil Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer