Vigitron Vi22201 Bruksanvisning
Vigitron
Nettverkskort/adapter
Vi22201
Les nedenfor 📖 manual på norsk for Vigitron Vi22201 (2 sider) i kategorien Nettverkskort/adapter. Denne guiden var nyttig for 34 personer og ble vurdert med 3.5 stjerner i gjennomsnitt av 17.5 brukere
Side 1/2
Application Drawing
Vi22201 802.3af/at Powered Device (PD) Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Important Safety Warning
- Select the output voltage using with the slide switch on the opposite side
of RJ45 connectors.
- Use the 12/24VDC output to power a non-PoE device. Be sure to observe
polarity where Red is Positive & Black is Negative.
- Connect a standard Cat5/6 cable of maximum 100m in length from a PoE
switch or Midspan to the Vi22201 DATA+Poe port.
- Connect another Cat5/6 cable to the DATA port of the Vi22201 to a
non-PoE device.
PoE Switch/NVR-end Installation
- The other end of the RJ45 cable needs to be connected to a PoE capable
port of a PoE switch or a Midspan. The PoE port need to be able to provide
enought power to the Vi22201 and its connected PoE device.
- Read these instructions.
- Keep these instructions.
- Follow all instructions.
- Heed all warnings.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75°C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The mains plug is used as the disconnect device and shall remain readily
operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus should not be exposed to
dripping or splashing and no objects filled with liquids, such as vases should
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru a PoE source device.
WARNING! - The main plug or the PoE + Data are used as the
disconnect device and should remain readily operable.
The Vi22201 is a PoE splitter that is fully compliant with IEEE 802.3af
(15.4W) and IEEE 802.3at (30W) standards. When used with a PoE switch
or PoE Midspan, it separates PoE from Ethernet data and regulates the PoE
high voltage to 12VDC or 24VDC.
It is designed to power Non-PoE IP devices and can provide 12VDC or
24VDC up to 30W. The output voltage is selected by a slide switch. The
Vi22201 is equipped with over current protection to safeguard connected
devices and can operate at extended temperature of -40°C to +75°C. It is
compact in size and can fit easily in most camera housings. The Vi22201
can be combined with extenders to provide remote DC power over UTP,
Coax or single pair wire at distances up to 3,000 without the need for local
power supplies.
The Vi22201 is capable of meeting the demanding power requirements for
access control, lighting, emergency phone systems and cameras with
heaters/blowers. It is an ideal solution for providing remote power to
non-PoE IP devices and save installation time and cost.
Powering non-PoE devices at standard and extended distances
The Vi22201 can power a wide range of PoE devices at standard and extended distances up
to 30W.
12/24VDC
Data
Data + PoE
Extended UTP
Data + PoE
Extended Coax
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Coax
Cat 5/6
Vi2401A
Vi22201
Vi2401A
Emergency
Call Box
Emergency
Light
Vi2301A
Vi22201
Vi2301A
Data + PoE
Data + PoE
Vi22201
Vi22201
LED Light
12/24VDC
Data
12/24VDC
Data
12/24VDC
Data
IP Camera
Maxii
Power
TM
Produkspesifikasjoner
| Merke: | Vigitron |
| Kategori: | Nettverkskort/adapter |
| Modell: | Vi22201 |
Trenger du hjelp?
Hvis du trenger hjelp med Vigitron Vi22201 still et spørsmål nedenfor, og andre brukere vil svare deg
Nettverkskort/adapter Vigitron Manualer
3 April 2025
15 Mars 2025
15 Mars 2025
10 Desember 2024
10 Desember 2024
Nettverkskort/adapter Manualer
- Speco Technologies
- Apc
- AVPro Edge
- Asustor
- Vivolink
- Extron
- Russound
- Aukey
- Rocstor
- Mikrotik
- StarTech.com
- GeoVision
- Hama
- Trendnet
- Hamlet
Nyeste Nettverkskort/adapter Manualer
8 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Mars 2025
29 Mars 2025
12 Mars 2025
11 Mars 2025
7 Mars 2025