Whirlpool WFC 3C33 F X Bruksanvisning

Whirlpool Oppvaskmaskin WFC 3C33 F X

Les nedenfor 📖 manual på norsk for Whirlpool WFC 3C33 F X (22 sider) i kategorien Oppvaskmaskin. Denne guiden var nyttig for 15 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/22
ENQuick Guide
1
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.whirlpool.eu/register
CONTROL PANEL
FIRST TIME USE
1. On-O/Reset button with indicator light
2. Program selection button with indica-
tor light
3. Multizone button with indicator light
/ Key lock
4. Eco program indicator light
5. Key lock indicator light
6. Display
7. Program number and remaining time
indicator
Program Programs description
Drying
phase
NaturalD-
ry
Available
options
*)
Duration
of wash
program
(h:min)
**)
Water
consump-
tion
(litres/cycle)
Energy
consump-
tion
(kWh/cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware,
that for this use, it is the most ecient programme in terms of its
combined energy and water consumption, and that it is used to
assess compliance with the EU Ecodesign legislation.
3:10 9.5 0.85
2.
6
th
Sense® 50°- 60°- For normally soiled dishes with dried food
residues. Senses the level of soiling on the dishes and adjusts the
program accordingly.
1:25 - 3:00 7.0 - 14.0 0.90 - 1.40
3.
Intensive 65° - Program recommended for heavily soiled crockery,
especially suitable for pans and saucepans.
2:50 16.0 1.60
4.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that
ensures optimal cleaning and drying performance in shorter time.
1:25 11.5 1.10
5.
Crystals 45° - Program for delicate items, which are more sensitive
to high temperatures, for example glasses and cups.
1:40 11.5 1.20
6.
Rapid 30’ 50° - Program to be used for half load of lightly-soiled
dishes with no dried food residues. Without drying.
- -
0:30 9.0 0.50
7.
Silent 50° - Suitable for night-time operation of the appliance.
With the lowest noise.
3:30 15.0 1.15
8.
Prewash - Use to refresh crockery planned to be washed later. No
detergent to be used with this program.
- -
0:12 4.5 0.01
PROGRAMS TABLE
Before using the appliance carefully read the Safety Instruction.
PLEASE SCAN THE QR CODE ON YOUR
APPLIANCE IN ORDER TO HAVE MORE
DETAILED INFORMATION
3
1
2
8
13
14
5
4
6
71112
9
10
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the
appliance tub.
A
C
D
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
8. Tablet (Tab) indica-
tor light
9. Closed water tap
indicator light
10. Rinse Aid rell
indicator light
11. Salt rell indicator light
12. Sani Rinse button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out
2
Quick GuideEN
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.
Please scan the QR code on your product in order to have more detailed information.
More information in the Daily Reference Guide on the website.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
The lower spray arm may
be removed by pulling it
upwards.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product’s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
CUTLERY RACK
(loading example for the cutlery
rack)
The third rack was designed to
house the cutlery.
UPPER RACK
(loading example for the upper
rack)
Load delicate and light dish-
es: glasses, cups, saucers, low
salad bowls.
Foldable
aps with
adjustable
position
LOWER RACK
For pots, lids, plates, salad bowls, cutlery
etc. Large plates and lids should ideally
be placed at the sides to avoid interfer-
ences with the spray arm.
The lower rack has tip-up supports
which can be used in a vertical position
when arranging plates or in a horizontal
position (lower) to load pans and salad
bowls easily.
(loading example for the lower rack)
LOADING THE RACKS
CAPACITY: 14 standard place-settings
TROUBLESHOOTING
Please scan the QR code on your product in order to have more detailed information.
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
KEYLOCK - A long press (for 3 seconds) of MULTIZONE button, will
activate the KEYLOCK function. To deactivate the KEYLOCK, long press again.
DELAY -The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
The DELAY function cannot be set once a wash cycle has been started.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be o.
MULTIZONE - If there are not many dishes to be washed, a half load-
ing may be used in order to save water, electricity and detergent. By
default the appliance washes dishes in all racks.
SANI RINSE - This option can be used to sanitize washed dishes.
It will increase nal rinse temperature and add antibacterial wash to the
selected program. WARNING: the crockery and plates could be extremely
hot at the end of the cycle.
NaturalDry is a convection drying system which automatically opens the
door during/after drying phase to ensure exceptional drying performance
every day. Door opens at the temperature that is safe to your kitchen fur-
niture, thus door will not be opened when the option of SANI RINSE is on.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does not
ll the water. Display shows:
and F6, both On/O
and START/Pause LEDs are
blinking rapidly.
No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher
and reboot.
The sieve in the water inlet hose is clogged; it is
necessary to clean it.
After having carried out the verication and cleaning, turn o and turn on the dish-
washer and restart a new program.
Dishwasher nishes the cycle
prematurely.
Display shows: F15 and both
On/O and START/Pause
LEDs are blinking rapidly.
Drain hose positioned too low or siphoning into
home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check for
siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
CSStručný Návod
3
NAPLNĚNÍ ZÁSOBNÍKU SOLI
Použití soli vede k předcházení usazování VODNÍHO KAMENE na nádobí a
funkčních součástech myčky.
• ZÁSOBNÍK NA SŮL NESMÍ NIKDY ZŮSTAT PRÁZDNÝ.
• Nastavení tvrdosti vody je důležité.
Zásobník na sůl se nachází ve spodní části myčky (viz POPIS SPOTŘEBIČE)a je
nutné jej naplnit, když na ovládacím panelu svítí kontrolka DOPLNIT SŮL .
1. Vytáhněte spodní koš a odšroubujte víčko zásobníku
(proti směru hodinových ručiček).
2. Následující kroky provádějte pouze při prvním
použití: Naplňte zásobník soli vodou.
3. Umístěte trychtýř (viz obrázek) a naplňte zásobník solí
až po okraj (přibližně 1 kg); odtékání určitého množ-
ství vody je přitom normální.
4. Vyjměte trychtýř a otřete z otvoru přebytečnou sůl.
Ujistěte se, že je víčko pevně dotaženo, aby se do zásobníku nedostal při
mytí žádný mycí prostředek (to by mohlo vést k neopravitelnému poškoze-
ní změkčovače vody).
Pokud potřebujete doplnit sůl, je nutné tento proces dokončit před
začátkem mycího cyklu aby se předešlo korozi.
DOPLNĚNÍ DÁVKOVAČE LEŠTIDLA
Díky leštidlu nádobí lépe schne. Zásobník leštidla A by měl být doplněn
pokaždé, když se na ovládacím panelu rozsvítí
kontrolka „NEDOSTATEK LEŠTIDLA“ .
NIKDY nelijte leštidlo přímo do myčky.
DOPLNĚNÍ DÁVKOVAČE MYCÍHO PRO-
STŘEDKU
K otevření zásobníku mycího prostředku použijte otevírací prvek C. Dáv-
kujte mycí prostředek výhradně do suchého zásobníku D. Prostředek pro
předmytí dávkujte přímo do prostoru myčky.
Používáte-li tablety typu „vše v jednom“, doporučujeme stisknout tlačítko
TABLETA, čímž se program přizpůsobí, aby bylo možno dosáhnout ideál-
ních mycích výsledků.
Použití čisticího prostředku, který není určený pro myčky nádobí,
může způsobit nesprávný chod nebo poškození spotřebiče.
SYSTÉM PRO ZMĚKČOVÁNÍ VODY
Změkčovač vody automaticky snižuje tvrdost vody, azabraňuje tak nahro-
madění vodního kamene na ohřívači apřispívá kvyšší účinnosti mytí.
Tento systém kregeneraci využívá sůl, proto je nutné doplňovat zá-
sobník na sůl, když se vyprázdní.
Četnost regenerace záleží na nastavení úrovně tvrdosti vody – s úrovní tvr-
dosti nastavené na 3 probíhá regenerace jednou za 6 Eco cyklů.
Regenerační proces se spustí po závěrečném oplachu adokončí se během
sušení před skončením cyklu.
• Spotřeba během jedné regenerace: ~ 3,5l vody;
• Prodloužení cyklu až o5minut;
• Spotřeba méně než 0,005kWh energie.
OVLÁDACÍ PANEL
PRVNÍ POUŽITÍ
Před použitím spotřebiče si pečlivě přečtěte Bezpečnostní pokyny.
TABULKA PROGRAMŮ
PRO ZÍSKÁNÍ PODROBNĚJŠÍCH IN-
FORMACÍ NASKENUJTE PROSÍM QR
KÓD NA VAŠEM SPOTŘEBIČI.
DĚKUJEME VÁM, ŽE JSTE SI ZAKOUPILI VÝROBEK ZNAČKY WHIRLPOOL.
Pro získání komplexnější asistence zaregistrujte prosím svůj
spotřebič na: www.whirlpool.eu/register
A
C
D
1. Tlačítko „Zapnout-Vypnout/Vynulo-
vat“ skontrolkou
2. Tlačítko volby programu s kontrolkou
3. Tlačítko „Multizone“ s kontrolkou /
„Zámek tlačítek“
4. Kontrolka „Eko“
5. Kontrolka „Zámek tlačítek“
6. Displej
7. Ukazatel čísla programu a zbývajícího
času
8. Kontrolka „Tableta“ (Tab)
Program Popis programů
Fáze
sušení
Natural-
Dry
Dostupné funkce
*)
Délka
mycího
programu
(h:min)
**)
Spotřeba
vody
(litrů/cyklus)
Spotřeba-
energie
(kWh/cyklus)
1.
Eko 50°- Program Eko je vhodný kmytí běžně zašpiněného nádo-
bí, který je pro tento účel nejvýhodnějším programem sohledem
na spotřebu energie avody akterý se využívá kvyhodnocení sho-
dy spotřebiče spředpisy Ecodesign EU.
3:10 9,5 0,85
2.
6
th
Sense® 50°- 60°- Pro běžně zašpiněné nádobí se zaschlými ne-
čistotami. Myčka zjistí úroveň zašpinění nádobí a odpovídajícím
způsobem nastaví program. Když senzor snímá úroveň znečištění
nádobí, na displeji se zobrazí odpovídající symbol a aktualizuje se
délka cyklu.
1:25 - 3:00 7,0 - 14,0 0,90 - 1,40
3.
Intenzivní 65° - Program doporučený pro velmi špinavé nádobí,
hlavně hrnce apánve (nepoužívat Ina jemné nádobí).
2:50 16,0 1,60
4.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
Rychlé mytí asušení 45° - Běžně zašpiněné nádobí. Běžný ka-
ždodenní program zajišťující optimální účinnost mytí a sušení
vkratším čase.
1:25 11,5 1,10
5.
Křišťál
45° -
Program pro choulostivé nádobí, které je citlivější na
vysoké teploty, jako jsou například sklenice ahrnky
.
1:40 11,5 1,20
6.
Rychlý 30’
50° -
Program určený pro poloviční naplnění lehce zašpině-
ným nádobím bez zaschlých zbytků.
Nezahrnuje fázi sušení.
- -
0:30 9,0 0,50
7.
Tichý 50° - Ideální pro noční provoz spotřebiče. Zajišťuje optimál-
ní účinnost mytí asušení při minimální hladině hluku.
3:30 15,0 1,15
8.
Předmytí - Používejte pro opláchnutí nádobí, které plánujete mýt
později. V tomto programu se nepoužívá žádný mycí prostředek.
- -
0:12 4,5 0,01
9. Kontrolka „Uzavře-
ný přívod vody“
10. Kontrolka množství
leštidla
11. Kontrolka množství
soli
12. Tlačítko „Hygienic-
ký Oplach” s kontrolkou / „Tableta“ (Tab)
13. Tlačítko „Odložený start“ s kontrolkou
14. Tlačítko Spustit/Pozastavit s kontrolkou / Vypouštění
3
1
2
8
13
14
5
4
6
71112
9
10

Produkspesifikasjoner

Merke: Whirlpool
Kategori: Oppvaskmaskin
Modell: WFC 3C33 F X

Trenger du hjelp?

Hvis du trenger hjelp med Whirlpool WFC 3C33 F X still et spørsmål nedenfor, og andre brukere vil svare deg


Oppvaskmaskin Whirlpool Manualer

Whirlpool

Whirlpool W7U HS51 X Bruksanvisning

13 Februar 2025
Whirlpool

Whirlpool WIS 7020 PEF Bruksanvisning

7 Februar 2025
Whirlpool

Whirlpool WFO 3P31 PL X Bruksanvisning

7 Februar 2025
Whirlpool

Whirlpool W7I HP42 LO Bruksanvisning

7 Februar 2025
Whirlpool

Whirlpool W7I HP40 L Bruksanvisning

7 Februar 2025
Whirlpool

Whirlpool WH3ID10BS7SA0 Bruksanvisning

14 Januar 2025
Whirlpool

Whirlpool WH8IA15AM3TUS0 Bruksanvisning

14 Januar 2025
Whirlpool

Whirlpool WH8IC15B4M6LHC0 Bruksanvisning

14 Januar 2025
Whirlpool

Whirlpool W0I D734L S Bruksanvisning

14 Januar 2025
Whirlpool

Whirlpool WH8IB15B2M6LS0 Bruksanvisning

14 Januar 2025

Oppvaskmaskin Manualer

Nyeste Oppvaskmaskin Manualer

Sharp

Sharp QW-I1GI47EX Bruksanvisning

10 April 2025
Miele

Miele G 5432 SCU Bruksanvisning

9 April 2025
Miele

Miele G 5495 SCVi XXL Active Plus Bruksanvisning

9 April 2025
Oranier

Oranier GAVI 7592 XL Bruksanvisning

9 April 2025
Amica

Amica DIM44D6EBq Bruksanvisning

9 April 2025
AEG

AEG F75BV70APW Bruksanvisning

8 April 2025
BEKO

BEKO BDFN26450XC Bruksanvisning

8 April 2025
Asko

Asko DFI544B Bruksanvisning

8 April 2025
AEG

AEG FSK73747P Bruksanvisning

8 April 2025
Asko

Asko DFI545N Bruksanvisning

7 April 2025