Whirlpool WIO 3T126 PFE Bruksanvisning

Whirlpool Oppvaskmaskin WIO 3T126 PFE

Les nedenfor 📖 manual på norsk for Whirlpool WIO 3T126 PFE (20 sider) i kategorien Oppvaskmaskin. Denne guiden var nyttig for 7 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 4 brukere

Last ned PDF

Side 1/20

ENQuick Guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, please

CONTROL PANEL

1. ON-OFF/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

7. Display

8. Multizone indicator lights

Before using the appliance carefully read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

1 2 3 4 5 6 7 8 9 10

11 12 13

9. Multizone button

10. Delay button

11. Turbo button with indicator

light

12. Power Clean® button with

indicator light

13. START/Pause button with

indicator light / Tab

FIRST TIME USE

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Position the funnel (see gure) and ll the salt reservoir

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

3. Only the rst time you do this: ll the salt reservoir

with water.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water sof-

tener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid

dispenser A should be lled when the RINSE AID

REFILL indicator light in the control panel is lit.

NEVER pour the rinse aid directly into the

appliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser D only. Place the amount of detergent for

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently prevent-

ing scale buildup on heater, contributing also to better cleaning eciency.

This system regenerates itself with salt, therefore it is required to rell

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

Program

Programs description

Drying

phase

Natural-

Dry

Available

options

Duration

of wash

program

(h:min)

**)

Water

consump-

tion

(litres/cycle)

Energy

consump-

tion

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware, that

for this use, it is the most ecient programme in terms of its combined

energy and water consumption, and that it is used to assess compli-

ance with the EU Ecodesign legislation.

3:10 9.5 0.95

Sense® 50°- 60°- For normally soiled dishes with dried food resi-

dues. Senses the level of soiling on the dishes and adjusts the program

accordingly.

1:25 - 3:00 7.0 - 14.0 0.90 - 1.40

Intensive 65° - Program recommended for heavily soiled crockery, es-

pecially suitable for pans and saucepans.

2:50 16.0 1.60

Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that en-

sures optimal cleaning and drying performance in shorter time.

1:25 11.5 1.10

Crystals 45° - Program for delicate items, which are more sensitive to

high temperatures, for example glasses and cups.

1:40 11.5 1.20

Rapid 30’ 50° - Program to be used for half load of lightly-soiled dishes

with no dried food residues. Without drying.

- -

0:30 9.0 0.50

Silent 50° - Suitable for night-time operation of the appliance.

With the lowest noise.

3:30 15.0 1.15

Prewash - Use to refresh crockery planned to be washed later.

No detergent to be used with this program.

- -

0:12 4.5 0.01

PROGRAMS TABLE

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

Quick GuideEN

TURBO - This option can be used to reduce the duration of the main

programs while maintaining the same washing and drying performance levels.

DELAY - The start time of the program may be delayed for a period of

time between 1 and 12 hours.

The DELAY function cannot be set once a wash cycle has been started.

POWER CLEAN® - Thanks to the additional power jets this option

provides a more intensive and powerful wash in the lower rack, in the

specic area. This option is recommended for washing pots and casseroles.

TABLET (Tab)- If you use powder or liquid detergent, this option

should be off.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.

MULTIZONE - If there are not many dishes to be washed, a half load-

ing may be used in order to save water, electricity and detergent. By

default the appliance washes dishes in all racks.

Please scan the QR code on your product in order to have more detailed information.

NaturalDry is a convection drying system which automatically opens the

door during/after drying phase to ensure exceptional drying performance

every day. Door opens at the temperature that is safe to your kitchen furni-

ture, thus door will not be opened when the option of TURBO is on.

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The dishwasher does

not ll the water.

Display shows: H, 6 and

On/O LED is blinking

rapidly

No water in the water supply or the tap is closed.

Make sure there is water in the water supply or the tap running.

The inlet hose is bent.

Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-

washer and reboot.

The sieve in the water inlet hose is clogged; it

is necessary to clean it

After having carried out the verication and cleaning, turn o and turn on

the dishwasher and restart a new program.

Dishwasher nishes the

cycle prematurely. Dis-

play shows: 15 and On/

O LED is blinking rapidly

Drain hose positioned too low or siphoning

into home sewage system.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check

for siphoning into home sewage system, install air admittance valve if necessary.

Air in water supply. Check water supply for leaks or other issues letting air inside.

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues

please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a

period of either up to 7 or up to 10 years, according to the specic Regulation requirements.

TROUBLESHOOTING

Please scan the QR code on your product in order to have more detailed information.

More information in the Daily Reference Guide on website.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)

please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

To remove the upper spray arm,

turn the plastic locking ring in a

clockwise direction.

The lower spray arm may be

removed by pulling it up-

wards.

LOADING THE RACKS

CAPACITY: 14 standard place-settings

CUTLERY RACK

The third rack was designed to house the

cutlery.

(loading example for the cutlery rack)

UPPER RACK

Load delicate and light dish-

es: glasses, cups, saucers, low

salad bowls.

(loading example for the up-

per rack)

FOLDABLE FLAPS

WITH

ADJUSTABLE

POSITION

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc.

Large plates and lids should ideally be placed

at the sides to avoid interferences with the

spray arm.

The lower rack has tip-up supports which can

be used in a vertical position when arranging

plates or in a horizontal position (lower) to

load pans and salad bowls easily.

(loading example for the lower rack)

POWER CLEAN®

Power Clean® uses the

special water jets in the rear of cavity to wash

more intensively the high dirty items. The lower

rack has a Space Zone, a special pull-out support

in the rear of the rack that can be used to support

frying pans or baking pans in upright position,

thus taking up less space.

Placing the pots/casseroles faced to the Power Clean® component please

activate the POWER CLEAN® on the panel.

OPERATION INDICATOR - A LED light projected on the oor indicates

that the dishwasher is working. One of the following operating modes

can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds, stays o during

the cycle and ashes at the end of the cycle.

c) The light stays on during the cycle and ashes at the end of the cycle

(default mode).

Produkspesifikasjoner

Merke:	Whirlpool
Kategori:	Oppvaskmaskin
Modell:	WIO 3T126 PFE
Innebygd skjerm:	Ja
Vekt:	35500 g
Bredde:	598 mm
Dybde:	555 mm
Høyde:	820 mm
Energieffektivitetsklasse:	E
Barnelås:	Ja
Støynivå:	46 dB
Vannforbruk per syklus:	9.5 l
Selvrensende:	Ja
Støyutslippsklasse:	C
Antall vaskeprogrammer:	10
Energiforbruk per 100 sykluser:	95 kWh
Pakkevekt:	37500 g
Saltindikator:	Ja
Selvrensende filter:	Ja
Oppvaskprogrammer:	Auto, Eco, Glass/delicate, Intensive, Pre-wash, Rinse, Silent
Energiforbruk per syklus:	0.934 kWh
AC-inngangsspenning:	220 - 240 V
AC-inngangsfrekvens:	50 Hz
Energieffektivitetsskala:	A til G
Kabellengde:	1.3 m
Skjermtype:	LED
Kontrolltype:	Knapper
Wi-Fi kontrollert:	Nei
Klar-indikator:	Ja
Aquastop-funksjon:	Ja
Produktstørrelse:	Full størrelse (60 cm)
Strøm:	10 A
Plassering av innretning:	Fullstendig innebygget
Tilkoblet nettbelastning:	1900 W
Temperatur (maks):	60 °C
Strømforbruk, av:	0.5 W
Dør farge:	Hvit
Dybde installasjonskammer:	560 mm
Bredde installasjonskammer:	600 mm
Lav innebygget kapasitet (uten topp):	Nei
Lenge på tilkoblingsslange:	1.55 m
Lengde utløpsslange:	1.5 m
Justerbar høyde for den øverste kurven:	Ja
Vannoppfylling:	Cold, Hot
Bestikkavdelingstype:	Kurv
Avtagbar topp:	Nei
Justerbare bein:	Ja
Gjenværende tid angis:	Ja
Rensemiddelindikator:	Ja
Antall kuverter:	14 kuverter
Syklustid:	190 min
Påslått modusvarighet:	12 min
Halvfull maskin:	Ja
Forsinket start:	12 timer
Forsinket start timer:	Ja
Inegrert tidsur:	Ja
Strømforbruk (påslått modus):	6 W
Installasjonskammer høyde (maks):	900 mm
Installasjonskammer høyde (min):	820 mm