Xiaomi Beva Magic Star Bruksanvisning

Xiaomi Høyttaler Beva Magic Star

Les nedenfor 📖 manual på norsk for Xiaomi Beva Magic Star (3 sider) i kategorien Høyttaler. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/3
Beva Magic Star Bluetooth Speaker Overview Using
Accessories
Magic Star Speaker
User Manual
USB cabel
Hanging ring
Schematic image of device
Previous track / volume decrease
Status indicator
Charging/ data port
Function switch Button
Play/ Pause
Next track /
volume increase
On/ O󰀨 button
TF card slot (Max capacity 64GB)
On/O󰀨
Press and hold a power button to
turn the device on or o󰀨. If within 2
minutes device is not connected, or
for 10 minutes does not play music,
Beva Magic Star Bluetooth Speaker
is automatically switched o󰀨 so as not
to disturb you and to save energy.
Play/Pause
Click on button to turn on music playback, and pause it.
Function switch button
Click on button to start playback music via Bluetooth or TF
card. Press and hold button to turn o󰀨 current connection
via Bluetooth.
Using
Volume control
During music playback, press «+»
or «-» to increase or decrease
volume.
Track control
During music playback, press «+»
or «-» to select previous or next
track.
Connection to Bluetooth or using a TF card
Bluetooth connection
1. If Beva Magic Star Bluetooth Speaker is turned on, it
automatically goes into a Bluetooth pairing mode. At this
time, the indicator ashes quickly.
2. Turn on Bluetooth on your phone, select «BEVA-M1».
3. A steady white light indicates successful pairing devices.
(If your device has an old version of Bluetooth, you will
need to enter a password «0000» to connect).
4. After a successful pairing of devices in your phone, open
music player, and select favorite track.
5. Beva Magic Star Bluetooth Speaker has a memory
function. Turn on Bluetooth on your phone, which previously
matched with the device, and after 30 seconds Beva
Magic Star Bluetooth Speaker will automatically perform a
Bluetooth connection.
XIAOMI-MI.COM
Connection to Bluetooth or using a TF card
Using of TF card
1. After turning on, Beva Magic Star Bluetooth Speaker
immediately detect a presence of TF card and be able to
play all of its contents.
2. If, before switching the device you insert TF card, rst
perform a Bluetooth connection.
3. By default, the device priority is to play les from TF
card. Even if at present time the device is connected to
other smart devices over Bluetooth, as soon as you insert a
TF card, Beva Magic Star Bluetooth Speaker, rst paused,
and then start to play contents of TF card.
4. During playback, content of TF card, you can easily
switch to Bluetooth connection mode, pressing the
«Function switch button».
USB stick
During playback les from TF card, connect the device
to your computerб using the USB cable. Beva Magic
Star Bluetooth Speaker, rst stop on a break, and then
switches to playback content from a USB stick. In this
mode, you can copy your favorite songs from your
computer to TF card.
Charging the device
Beva Magic Star Bluetooth Speaker is equipped with a
lithium-polymer battery of high capacity. A battery can be
repeatedly used. There are two methods of charging Beva
Magic Star Bluetooth Speaker: from a computer or power
adapter.
Charging from a computer via a USB cable:
Using a USB cable, connect Beva Magic Star Bluetooth
Speaker to your PC, and then the device starts charging.
Charging from the AC adapter:
Using a power cord, plug Beva Magic Star Bluetooth
Speaker to a power adapter, and then the device starts
charging.
* During charging, status indicator is lit in red. Once the
device fully charged, indicator turns o󰀨.
Statusd indicator
Fast blinking white light indicates that the device waits for
Bluetooth connection.
Slowly ashing LED white color indicates le playback with
TF card.
A steady white light indicates successful pairing with
Bluetooth devices or using Bluetooth le playback.
A steady red light indicates charging mode device.
If red light is turned o󰀨, Beva Magic Star Bluetooth Speaker
is fully charged.
FAQ
Problems with playback.
1. Make sure your smartphone is within Bluetooth range
(less than 10m). The signal will be weakened if there are any
obstacles between the devices.
2. Check charge level of Beva Magic Star Bluetooth
Speaker. If battery level is low, charge the device.
The device does not nd Beva Magic Star Bluetooth
Speaker. Problems with pairing devices.
1. Ensure that Bluetooth pairing Beva Magic Star Bluetooth
Speaker is on (fast white light is ashing).
2. Make sure that devices are within Bluetooth range (less
than 10m).
3. Make sure that your smartphone or other Smart Bluetooth
devices support A2HP protocol. Make sure you’re have
latest Bluetooth drivers version.
4. Make sure that Beva Magic Star Bluetooth Speaker is not
connected to a smartphone or other Smart Bluetooth device.
5. Make sure that Beva Magic Star Bluetooth Speaker is not
connected to a computer via USB cable, turn on USB ash
drive mode.
6. Re-enable and set Bluetooth pairing on your phone.
Unable to connect to Beva Magic Star Bluetooth
Speaker
1. A new device cannot connect to this device, if Beva
Magic Star Bluetooth Speaker is already connected to a
smartphone or other Smart Bluetooth device.
2. Turn o󰀨 Bluetooth on your phone, then turn o󰀨 current pair
of devices. Perform a new connection to Beva Magic Star
Bluetooth Speaker.
Main specications
Model: BABY-M1;
Dimensions: W134.5 x H84.5 x D45 mm;
Standard of Bluetooth V2.1 + EDR (A2DP);
Transmission Distance: <10m (Data transmission distance
depends on environment and on Bluetooth settings on your
phone);
Voltage of USB charging: DC 5V;
Output power: 1.5 W;
Battery: 3.7V/450 mAh Li-polymere;
Playback time: est. 6 hrs. (on volume 50%);
Weight: 101g.
Cautions
1. It is not recommended to use this device in areas
with high temperature, high humidity or near ammable
substances to avoid damage or short circuit.
2. Do not install this device near devices with strong
magnetic elds.
3. Do not dispose of the device in water or other liquids.
4. Do not dispose of the device in order to avoid
breakdowns.
5. Do not disassemble the device yourself to avoid
breakage.
6. Do not use chemical solvents to clean the device. When
cleaning the device must be turned o󰀨 and not charged.
XIAOMI-MI.COM
XIAOMI-MI.COM
Cautions
7. If you are not using the device, disconnect it from power
supply to avoid power consumption.
8. Special reminder: before using it to charge the device
using a charging cable that comes with as standard.
Beva APP
It is children’s radio, where you can listen to di󰀨erent stories,
songs, audiobooks, foreign language, poems, music and
more training information. This will help to fully develop your
child from an early age.
For this feature, you must download and install «Beva» APP.
Methods for installing an application:
1. Use your smartphone to scan QR-code, and immediately
download and install an application.
QR-code to set Beva APP
2. In APP Store nd and install «Beva» АРР.
XIAOMI-MI.COM

Produkspesifikasjoner

Merke: Xiaomi
Kategori: Høyttaler
Modell: Beva Magic Star

Trenger du hjelp?

Hvis du trenger hjelp med Xiaomi Beva Magic Star still et spørsmål nedenfor, og andre brukere vil svare deg


Høyttaler Xiaomi Manualer

Xiaomi

Xiaomi Beva Magic Star Bruksanvisning

1 September 2025
Xiaomi

Xiaomi Smart Lite Bruksanvisning

22 Februar 2025

Høyttaler Manualer

Nyeste Høyttaler Manualer

Harman Kardon

Harman Kardon HKTS 9BQ Bruksanvisning

1 September 2025
Harman Kardon

Harman Kardon Citation 100 Bruksanvisning

1 September 2025
Harman Kardon

Harman Kardon Traveler Bruksanvisning

1 September 2025
Harman Kardon

Harman Kardon Allure Bruksanvisning

1 September 2025
Max

Max 215 Bruksanvisning

1 September 2025
Wet Sounds

Wet Sounds ZERO 8 XZ-W Bruksanvisning

1 September 2025
Audison

Audison Prima APBMW X4M Bruksanvisning

1 September 2025
Hama

Hama Blade Bruksanvisning

1 September 2025
Monacor

Monacor IT-400DT Bruksanvisning

1 September 2025
Monacor

Monacor ETS-215/WS Bruksanvisning

1 September 2025