Zojirushi SY-BA60N Bruksanvisning

Les nedenfor 📖 manual på norsk for Zojirushi SY-BA60N (18 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/18
^ 2z$ jiru s h i
Thermal Gravity Pot® Beverage Dispenser Operating Instructions
SY-BA60 / SY-BA60N (without Serving Base)
P le ase read these instructions before use, and keep for future reference.
Important Safeguards 2
......................................
Warnings & Cautions
3.......................................
Parts Name 3.......................................................
How to Use 4.......................................................
How to Disassemble and Assemble
8
...............
Cleaning and Maintenance 14
...........................
Q&A 15.................................................................
Specifications 16
.................................................
Replacement Parts 16
........................................
Do not dispense beverages without
the Serving Base attached.
Use only with the original Serving
Base for SY-BA60.
N e distribuez pas de boissons lorsque
la base de service n'est pas fixée.
N'utilisez I'appareil qu'avec la base de
service d'origine pour le SY-BA60.
No sirva bebidas sin la Base del
Dispensador colocada.
Utilicelo solo con la Base original para
el SY-BA60.
ZOJIRUSHI CORPORATION
Important Safeguards
Always follow these instructions to prevent scalding, deterioration and discoloration of beverages,
as well as malfunction and staining of the Dispenser.
Use only with the original Serving Base.
It may cause burns or other injury, if the Main Body is tipped over.
Do not dispense beverages without the Serving Base
attached.
It may cause burns or other injury, if the Main Body is tipped over.
Do not allow infants or small children to use this
product. Keep out of the reach of infants and small
children.
Mishandling may cause injury or scalding.
Do not attempt to repair the Dispenser by
disassembling or modifying the parts.
Doing so may cause malfunction or accidents.
Avoid dropping or hitting against hard surfaces.
Doing so may damage the Dispenser.
When moving the Main Body
with the Serving Base
attached, ensure that the
Serving Base is locked in
properly by making sure that
the Serving Base Lever is
fastened properly.
Not doing so may cause injury
or damage.
Serving
Base Lever
O
X
Consume beverages within the same day to prevent
from spoiling.
If left inside for a long period of time, the Stainless Liner
may deteriorate or corrode. Also, beverages left inside
may spoil and produce gas which increases the pressure
inside the Main Body, causing the Stopper Set to pop off
and beverages to spill, causing injuries.
Hold the Handle firmly when carrying the Dispenser.
Do not tilt the Dispenser or carry it on its side.
Do not touch th
e Pour Lever.
Do not hold the Dispenser by the Stopper Cover or
Stopper.
Doing so may cause burns or stains.
Do not tip over the Dispenser when filled with
beverages.
Doing so may cause burns or stains.
Do not place inside moving vehicles when filled with
beverages.
Doing so may cause burns, damage, or leakage.
Never use the Dispenser on an unstable surface.
The Main Body may tilt and cause burns or injuries.
Only fill beverages to the level indicated in the
illustration.
Overfilling may cause
the beverage to overflow
when the Stopper Set is
attached or leak from the
Sight G auge Tube Cover
(Top)
Leave 1 cm (1/2
inch) space below
the rim (part A)
Stainless Liner Beverage //II
(Vacuum Insulated)I V / / / / / / / / > / / A I
This Dispenser is for holding beverages and
keeping them hot or cold.
Please do not use for other than intended purposes.
Do not use the Dispenser if it loses its heat retention
properties.
The Exterior will become very hot when the Dispenser is
filled with hot beverages.
Do not use under direct sunlight or near open flames
from sources such as stoves.
Doing so may cause deformation or discoloration of the
Dispenser.
Always make sure that the Cap Gasket of the Valve
Set is attached to the Valve Cap. (See pg. 12)
If not, beverages may leak and cause scalding or stains.
Always make sure to attach the Stopper Set securely.
If not, beverages may spill.
Do not fill the Dispenser with the following:
Dry ice and carbonated drinks:
Pressure may build up inside, which may cause the Stopper
Set to become difficult to remove or cause beverages to
spray out or the Stopper Set or other parts to burst.
Dairy products and fruit juice:
If left inside for a long period of time, they may spoil,
produce gas, and increase pressure, causing contents to
spray out or the Stopper Set or other parts to burst.
Beverages high in sodium:
Although the Stainless Liner is made of 18/8 stainless steel,
this may cause corrosion and loss of thermal insulation.
Fruit pulp and tea leaves:
Doing so may clog the Valve Set and cause contents to
spoil.
Do not add milk or sugar to beverages in the
Stainless Liner.
Doing so may cause beverages to spoil or clog the Main
Body and cause leaks.
Precautions when cleaning:
Do not clean with thinner, benzene, abrasive cleaners
or other harsh cleaners.
Doing so may damage the Dispenser.
Do not use chlorine type bleach.
Doing so may damage the Stainless Liner by causing
corrosion or pinholes.
Do not boil. Do not use a dishwasher or dish-dryer.
Doing so may cause scratches, corrosion, deformation, or
other damages.
Do not immerse the Dispenser in water.
Doing so may cause water ingress, corrosion, malfunction
or staining of other parts of the Dispenser.
Clean the Stainless Liner throughly after every use.
Not doing so may damage the Stainless Liner by causing
corrosion, pinholes, malfunction, or the contents to spoil.
Do not place near open flames (from gas stoves, etc.),
on top of electric heaters or IH hot plates, or other IH
cooking devices.
Doing so may cause a fire or malfunction.
2
Warnings & Cautions
/
To avoid discoloration of tea that is kept hot in the
Dispenser, fill with hot water instead, and dispense it
into a small teapot or on tea bags to brew tea.
After use, always wash the Stopper Set, Valve Set,
Sight Gauge Tube, Sight Gauge Tube Covers (top and
bottom), Bottom Connection Tube, and Joint Seal
Rubber.
Leaving the Dispenser as-is may cause mold.
When filling with beverages, do not allow hot
containers such as kettles to touch the Dispenser
Shoulder or Mouth.
^ Doing so may cause scratches or deformation.
When taking the Dispenser out from under a
brewer or moving it elsewhere, always avoid
touching the Spout or Pour Lever against your
body or clothes.
The beverage may spill out and scald you or stain your
clothes.
When filling the Stainless Liner with ice, pour the
beverage in first, and then add the ice gently.
Break any ice cubes into smaller pieces before
adding them.
Not doing so may cause deformation or other damage.
When storing the Dispenser, place it inside a plastic bag before placing it in the box. Keep the box away
from places with high temperature and humidity. Make sure that the product is clean and dried
thoroughly before storing.
Parts Name
Make sure that all parts are attached
firmly before each use.
Sight Gauge Panel
The water level line on
the Sight Gauge Panel
is a guideline for the
amount of beverage
remaining inside the
Stainless Liner.
Stopper Set
Mouth
Stopper Cover
Stopper Mesh Set
Prevents fine coffee
grounds from flowing into
the Valve Set. (See pg. 12)
Stopper
Air Vent
Disposal Area
Shoulder
Handle
*A label can be attached to
the hole.
Stainless Liner
(Vacuum Insulated)
Drip Tray Set
Drip Tray Cover
_Drip Tray
approx. 4L
approx. 3L
annrnx 2L
approx. 1L
The illustrations used in this Operating Instructions may vary from the actual product you have purchased.
3

Produkspesifikasjoner

Merke: Zojirushi
Kategori: Ikke kategorisert
Modell: SY-BA60N

Trenger du hjelp?

Hvis du trenger hjelp med Zojirushi SY-BA60N still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Zojirushi Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer