Atdec A-STSFB Bruksanvisning

Atdec Ikke kategorisert A-STSFB

Les nedenfor 📖 manual på norsk for Atdec A-STSFB (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 1.5 brukere

Last ned PDF

Side 1/3

Lift Mechanism

Tabletop Base

Keyboard Bracket

Keyboard Tray

Keyboard Panel

Work Surface

Spacer (x2)Square Pad (x2)

Round Pad (x4)

Large Allen Key Small Allen Key

M6X8 (x2) M6X25 (x4)M6X12 (x10) M6X35 (x2)

H I J

LK M N O

Hardware

Installation Instructions

Sit-to-Stand Workstation

Freestanding

Step 1. Check components

Component Checklist

A-STSFB

Check that you have received all parts against the Component Checklist.

IMPORTANT INFORMATION

! IMPORTANT - Install as per Installation Instructions

! This product is compatible with Visidec

Focus and SYSTEMA

monitor mounts.

! This product supports a total maximum load of 28.6lbs (13 Kg ).

! The manufacturer accepts no responsibility for incorrect installation.

! Excessive pressure on the Keyboard Tray may result in the workstation tipping over.

! Ensure any required electrical/data cables have sufﬁcient length to accommodate the sit-to-stand workstation’s movement.

Step 2. Attach lift mechanism to work surface

Step 3. Attach keyboard bracket and tray

Step 4. Assemble tabletop base

Lift Paddle

Alternate Position

The lift paddle can

be attached on the

left or right side of

the work station.

Cable Routing

Route the lift

paddle cable

through the slot in

the plates on the lift

mechanism (A)

3.1

4.1

4.2

4.3

3.2

3.3

Caution

Avoid pressing

the lift paddle

until Step 4.

Caution

When pressing the

paddle, the lift mechanism

will rise. Keep clear as the

arm rises.

Depress the lift paddle to

raise the lift mechanism.

Lift

Paddle

Produkspesifikasjoner

Merke:	Atdec
Kategori:	Ikke kategorisert
Modell:	A-STSFB
Antall skjermer som støttes:	1
Høydejustering:	Ja
Produktfarge:	Sort
Montasjetype:	Bord
Maksimalvekt (kapasitet):	12 kg