Atdec A-STSWW-A Bruksanvisning
Atdec
Ikke kategorisert
A-STSWW-A
Les nedenfor 📖 manual på norsk for Atdec A-STSWW-A (6 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 1.5 brukere
Side 1/6
A-STSWW-A Page 1 of 5
Installation Instructions
Wall Mounted
Sit-to-Stand Workstation - Antimicrobial
Component Checklist
Step 1. Check Components
A
B
C D E
Lower Arm Upper Arm
Vertical Screen
Slider
Keyboard Tray Tilt Head
A-STSWW-A
• 8mm wrench
• Drill
• 10mm masonry bit
• 4.5mm drill bit
• Ratchet
• Spirit Level
• Stud Finder
• Pencil
5mm Allen 6mm Allen2.5mm Allen
M6X8 (x1) M4x10 (x4)M6X12 (x4)M8X20 (x1)
8mm
¼” Drive
Velcro
Strip (x2)
H J K L M N
PO Q R S T
Tools Required
Plastic
Washer (x1)
Coach
Screw (x6)
Nylon
Anchor (x6)
Metal
Washer (x1)
M6X10 (x3)
Hardware
F
G
Wall Mounting Hardware
Check that you have received all parts against the Component Checklist.
! IMPORTANT - Install as per Installation Instructions
! The manufacturer accepts no responsibility for incorrect installation.
! This product supports a maximum load 8Kg (17.6lbs.)
! The wall mount can be installed on vertical, at, solid concrete or brick walls, or timber stud walls only.
! The wall should be strong enough to sustain a weight of at least four times that of the display and wall mount bracket combined.
If in doubt, consult a structural engineer.
! Check wall anchors and screws every 3 months from the time of installation to ensure the workstation is rmly xed to the wall.
! Tighten all screws (do not exert excessive force to avoid breaking the screws or damaging their thread)
IMPORTANT INFORMATION
A-STSWW-A Page 2 of 5
2.3
2.4
2.5
F
L
A
G
Wall Plate
Remove top and
bottom covers from
the wall plate.
Push nylon
anchors into
each hole.
Fix wall plate to
the wall using 6
coach screws
10mm
55mm
Wall
2.1
2.2
H
o
l
e
D
i
m
e
n
s
i
o
n
s
Spirit
Level
2.3
2.4
F
L
A
Wall Plate
Remove top and
bottom covers from
the wall plate.
Fix wall plate to
the wall using 4
coach screws
4.5mm
55mm
Stud
2.2
H
o
l
e
D
i
m
e
n
s
i
o
n
s
2.1
Spirit
Level
Step 2. Option B - Stud wall installation
Tip: Screw in the top coach screw rst.
Use the supplied template
to mark and drill 4 holes
into the wall.
Two people
required
Note: Use a stud nder to ensure
all holes are drilled into the stud.
Step 2. Option A - Masonry or cement wall installation
Tip: Screw in the top coach screw rst.
Use the supplied template
to mark and drill 6 holes
into the wall.
Two people
required
Note: For optimum performance, use a spirit
level to ensure straight installation.
Produkspesifikasjoner
| Merke: | Atdec |
| Kategori: | Ikke kategorisert |
| Modell: | A-STSWW-A |
Trenger du hjelp?
Hvis du trenger hjelp med Atdec A-STSWW-A still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Atdec Manualer
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
Ikke kategorisert Manualer
- Helight
- CFH
- Roxio
- Samsung
- Lund
- Vogue
- Ultimate Speed
- Fluke
- Tektronix
- Clatronic
- Lemair
- Ampetronic
- Libec
- Rock N Roller
- Roesle
Nyeste Ikke kategorisert Manualer
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025