Atdec SD-POS-HA Bruksanvisning

Atdec Ikke kategorisert SD-POS-HA

Les nedenfor 📖 manual på norsk for Atdec SD-POS-HA (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 2.5 brukere

Last ned PDF

Side 1/2

Component Checklist

3/2.5mm

Allen Key (x1 each)

M4x12mm (x4)

M4x16mm (x4)

POS Assembly (x1)

Screw Cover (x1)

VESA Plate (x1)

Top Cap (x1)

M5 Grub Screw (x1)

14 Gauge

Screws (x4)

Installation

Template (x1)

M4x10mm (x4)

180

270

355

Gap in

Rotation

180

270

355

Gap

in Rotation

USER

Direction

Arrow

Direction Arrow

LOCKING HOLES

Direction Arrow

Locking Hole (Fixed)

0-90

Locking Hole

0-180

Locking Hole

0-270

Locking Hole

Base Plate

M5 Grub Screw

2.5mm Allen Key

3mm (0.12")

Pilot Holes

45mm

(1.75") Cable

Access Hole

14 Gauge

Screws (x4)

INSTALLATION

TEMPLATE

3mm (0.12")

USER

Security Screw (x1)

Installation Instructions

SD-POS-HA

Display l POS Height Adjustable

IMPORTANT INFORMATION:

Step 1. Check Components

Step 2. Limit Rotation

Step 3. Locate and Secure your POS Height Adjustable

! IMPORTANT - Install Spacedec POS Height Adjustable as per Installation Instructions.

! This product supports a maximum load of 20kg (44lbs).

! This product supports VESA mounting hole configurations: 75x75mm and 100x100mm.

! The height adjustment range (from desk level to the centre of the screen) 330-450mm (12.99"-17.72").

Display Mounting

Screws

Hardware

Your SD-POS-HA offers 355°

of Rotation. This can also be

limited to suit a specific

application. The direction in

which you mount SD-POS-HA

will determine where the 5°

gap in rotation is located,

and how you choose to limit

the rotation.

Determine the degree of rotation

you require

(refer to Mounting Options above).

To limit the rotation, use the

2.5mm Allen Key to insert the

supplied M5 Grub Screw into your

chosen Locking Hole until it sits

flush with the Base Plate.

NOTE: If you want the full

355° rotation, you do NOT

need to install a grub screw.

Mounting Options

Rotation Options

0° Rotation (Fixed)

0-90° Rotation

0-180° Rotation

0-270° Rotation

0-355° Rotation

Position the Installation Template in the desired

location on your work surface. Ensure the straight

edge sits perpendicular with the User’s line of

sight. Mark the center points of each of the

required holes onto the work surface with a pencil.

Drill 4 x 3mm (0.12") Pilot Holes to a depth of

15mm (0.59"). Use a 45mm (1.75") hole saw to

drill the Cable Access Hole in the work surface.

Reposition SD-POS-HA with the “Direction Arrow”

pointing in the direction required for your chosen

rotation. Secure the SD-POS-HA to the work surface

using the supplied 14 Gauge Screws (x4).

Check you have received all parts against the component checklist and Hardware above.

Pilot Holes

Cable Access Hole

NOTE: Philips-head

screwdriver not supplied

Centre for 45mm (1.75")

(optional)

! The minimum thickness of the mounting surface is 15mm (0.59") when using the manufacturer supplied Hardware.

! The manufacturer accepts no responsibility for incorrect installation.

Produkspesifikasjoner

Merke:	Atdec
Kategori:	Ikke kategorisert
Modell:	SD-POS-HA
Minimum skjermstørrelse:	- "
Produktfarge:	Sort
Montasjetype:	Gulv
Maksimalvekt (kapasitet):	20 kg
Monteringsgrensesnitt, kompatibilitet (min):	75 x 75 mm
Monteringsgrensesnitt, kompatibilitet (maks):	100 x 100 mm
Høyde (imperial):	17.91 "