AV:link HQT201 Bruksanvisning

AV:link Ikke kategorisert HQT201

Les nedenfor 📖 manual på norsk for AV:link HQT201 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 11 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 6 brukere

Last ned PDF

Side 1/2

HQT201

Dual Arm Adjustable TV/Monitor Wall Mount Bracket

Item ref: 129.512 UK

User Manual

Thank you for choosing av:link HQT201 TV/Monitor Bracket. This bracket constructed with reinforced steel structure allow display device up to 40

inches or up to 15kg in weight to be mounted on wall safely. Designed to be easily installed and supplied with all required installation hardware.

Caution:

Please read this manual thoroughly to avoid damage to property or personnel. If unsure in any part of this manual please refer to professional installer

for help:

- This product contains small components that could be choking hazard if swallowed, please keep away of reach from Children.

- This product is designed for mounting on wall studs or concrete wall. Always ensure the mounting surface will be capable to withstand the

combined weight of the TV bracket and TV, reinforcement may require for aged or weak wall.

- Safety gear such as glove and safety goggles must be worn during the installation. Minimum of two people are required throughout the

installation, failure to do so may result in injury or damaged property.

- This product is design for indoor use only, joint parts must be inspected at minimum of every two month for loose joint or aged parts.

Contents:

Please check all contents list below are included inside the box and return to retailer or dealer if components missing.

For this installation you will also require pencil, tape measurer, electric drill, stud finder and Philip (cross) screw driver.

Step 1 Fixing wall bracket –

For concrete wall installation first of all work out the height of the installation and ensure the spirit leveler indicate is leveled. Use pencil to mark where

the mounting holes will be and use an electric drill to drill a hole that is around 7/16” (10.5mm) wide and 2”(50mm) deep. Insert the wall mounting

plug into the hole and install the wall bracket as following.