Cambridge CXR200 Bruksanvisning

Les nedenfor 📖 manual på norsk for Cambridge CXR200 (17 sider) i kategorien Mottaker. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/17
CXR120/200
AV RECEIVER
2
Contents
Make sure you register your purchase.
Visit: www.cambridgeaudio.com/vip
By registering, you'll be the rst to know about:
Future product releases
Software upgrades
News, events and exclusive oers plus
competitions!
This guide is designed to make installing and using this product
as easy as possible. Information in this document has been
carefully checked for accuracy at the time of printing; however,
Cambridge Audio’s policy is one of continuous improvement,
therefore design and specications are subject to change without
prior notice.
© Copyright Cambridge Audio Ltd 2016.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol,
& DTS and the Symbol together are registered trademarks, and
DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
"HDMI","HDMI logo" and "High-Denition Multimedia Interface"
are trademarks or registered trademarks of HDMI Licensing LLC.
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
Important safety instructions .................................................................. 3
Limited warranty ...................................................................................... 4
Front panel controls ................................................................................ 5
Rear panel connections ........................................................................... 5
Main remote control ................................................................................ 6
Loudspeaker connections ....................................................................... 7
Analogue audio connections ................................................................... 7
Digital audio connections ........................................................................ 8
5.1/7.1 direct in ....................................................................................... 8
HDMI connections ................................................................................... 9
4K video resolution .................................................................................. 9
Aerial connections ................................................................................. 10
Using the tuner ...................................................................................... 10
Presets .................................................................................................. 10
StreamMagic ...................................................................................... 10
Operating instructions ........................................................................... 10
Selecting the source ........................................................................... 10
Selecting the desired listening mode ................................................. 10
Surround sound modes ......................................................................... 10
DSP modes ........................................................................................... 11
Stereo/Stereo + Sub ........................................................................... 11
Direct .................................................................................................. 11
All channels ........................................................................................ 11
Setup menu ........................................................................................... 12
Speaker setup .................................................................................... 12
Speaker conguration ........................................................................ 12
Auto Setup ......................................................................................... 12
Manual Setup ........................................................................................ 13
Input Setup ............................................................................................ 13
Lip sync .............................................................................................. 14
Zone 2 (CXR200 only) ............................................................................ 14
Network Setup....................................................................................... 14
Connecting to a wired network .......................................................... 14
Network Setup.................................................................................... 14
Wireless Setup ................................................................................... 14
General Settings .................................................................................... 15
HDMI Output Setup ............................................................................... 15
DTS-HD speaker re-map .................................................................... 16
Trigger outputs ................................................................................... 16
SW Version ......................................................................................... 16
Update Via USB ................................................................................. 16
Save Current Settings ........................................................................ 16
Load Current Settings ........................................................................ 16
Factory Reset ..................................................................................... 16
Network software update ...................................................................... 16
Web administration interface .............................................................. 16
Wired connection ............................................................................... 16
Wireless connection ........................................................................... 16
The process of setting up the CXR is rst to make all the connections to your
speakers and source equipment and then set the unit up via its On-Screen
Display (OSD). There are various settings and adjustments that need to be
made before the CXR can be used.
However before you actually decide which connections to make or perform
any adjustments it is strongly advised that you read through the 'Setup menu'
section of this manual rst, starting on page 12.
For more detailed information, please visit our website
www.cambridgeaudio.com for the product reference
manual and FAQ.
Before connecting
3
CXR120/200
For your own safety please read the following important safety instructions
carefully before attempting to connect this unit to the mains power supply.
They will also enable you to get the best performance from and prolong the
life of the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles and the point where they exit from the
apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power-
supply cord or plug having been damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON
THIS APPARATUS.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, re or the like.
TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC
MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC
RECEPTACLE. POUR DECONNECTER COMPLETEMENT L’APPAREIL DU
RESEAU D’ALIMENTATION, DECONNECTER LE CORDON D’ALIMENTATION
DE LA PRISE MURALE.
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY ACCESSIBLE. LA PRISE DU RESEAU D’ALIMENTATION DOIT
DEMEURER AISEMENT ACCESSIBLE”
Only use the mains cord supplied with this unit.
Important safety instructions
The lightning ash with the arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of un-insulated ‘dangerous
voltage’ within the product’s enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the service literature relevant to this appliance.
The symbol on this product indicates that it is of CLASS II (double
insulated) construction.
WEEE symbol
The crossed-out wheeled bin is the European Union symbol
for indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you purchased
this product for more information.
CE
mark
This product complies with European Low Voltage (2014/35/
EU), Electromagnetic Compatibility (2014/30/EU) and
Environmentally-friendly design of Energy-related Products (2009/125/EC)
Directives when used and installed according to this instruction manual.
For continued compliance only Cambridge Audio accessories should be
used with this product and servicing must be referred to qualied service
personnel.
RCM (Regulatory Compliance Mark)
This product meets the Safety, EMC and Radio Communications
requirements of the ERAC and ACMA.
CU-TR Mark
This product meets Russia, Byelorussia and Kazakhstan electronic
safety approvals.
Caution: Hot Surface. Do Not Touch
The top surface over the internal heat sink may become hot when
operating this product continuously. Do not touch hot areas,
especially around the "Hot surface mark" and the top panel.
FCC regulations
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Produkspesifikasjoner

Merke: Cambridge
Kategori: Mottaker
Modell: CXR200

Trenger du hjelp?

Hvis du trenger hjelp med Cambridge CXR200 still et spørsmål nedenfor, og andre brukere vil svare deg




Mottaker Cambridge Manualer

Mottaker Manualer

Nyeste Mottaker Manualer