Draper Expert 42397 Bruksanvisning

Draper Ikke kategorisert Expert 42397

Les nedenfor 📖 manual på norsk for Draper Expert 42397 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 1.5 brukere

Side 1/1
4 PIECE
TRACK ROD
REMOVAL TOOL
42397 – TRRT-4PC INSTRUCTIONS FOR USE
EN
Original Instructions
Version 2 May 2024
1. Specication
Part No. TRRT-4PC
Track Rod Arm Length : 350mm
Interchangeable
Head Diameter: 30 35mm
35 40mm
40 45mm
Drive Ends
Hex: 27mm (outer)
Square Drive: ½ (inner)
2. Health and Safety Instructions
•  Always refer to the vehicle manufacturers handbook
or Haynes manual before dismantling, as some
vehicles must be put into service mode. Failure to
follow the vehicle manufacturers service procedure
can result in steering loss.
•  Draper tools accepts no responsibility for incorrect
installation of steering components.
3. Instruction for Use
1. Access the track rod and then allow the track rod to
pass through the hollow body (A) until the head of the
tool (B) meets the steering joint (C).
2. Use either a 27mm spanner or ½ square drive to turn
the tool anti-clockwise to loosen the steering joint.
3. Reverse the process with the new joint.
© Published by Draper Tools Limited
Contact Details
Draper Tools, Draper Tools Limited, Hursley Road,
Chandlers Ford, Eastleigh, Hampshire, SO53 1YF, UK
Website: drapertools.com
Email: sales@drapertools.com
Product Helpline: +44 (0) 23 8049 4344
Telephone Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
Please contact the Draper Tools Product Helpline for
repair and servicing enquiries.
Delta International, Delta International BV,
Oude Graaf 8, 6002 NL, Weert, Netherlands
(B)
(C)
(A)

Produkspesifikasjoner

Merke: Draper
Kategori: Ikke kategorisert
Modell: Expert 42397

Trenger du hjelp?

Hvis du trenger hjelp med Draper Expert 42397 still et spørsmål nedenfor, og andre brukere vil svare deg