Festo EADH-E17-MP1 Bruksanvisning
Festo
Ikke kategorisert
EADH-E17-MP1
Les nedenfor 📖 manual på norsk for Festo EADH-E17-MP1 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 30 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 15.5 brukere
Side 1/1
Assembly instructions (Original instructions)
8079028
2017-09a
[8079030]
†‡
Multi-pin plug set
EADH-E17-MP1
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Further applicable documents
All available documents for the product www.f
esto.com/pk
Observe further applicable documents:
Description of the linear gantry 9
Assembly instructions for the connecting cable 8
2. Safety
Switch off power supply before starting the mounting work.
Do not connect or disconnect plug connectors when powered.
Comply with tightening torques ( Table).
Secure mounting component 6 with adhesive 4.
Observe the safety data sheet of the adhesive 4 from the original
manufacturer.
3. Use for intended purpose
Multi-pin plug set EADH-E17-MP1:
Mounting and connection of the multi-pin plug distributor 1 to the Z-axis
of the linear gantry 9.
4. Scope of delivery
22062d_1
1 Multi-pin plug
distributor
NEDU-L4R1-M8G3L-
M12G8
2 Adapter plate
3 Nut
4 Adhesive
LOCTITE 243
5 Cover cap
ISK-M8
6 Screw
7 Screw
(1x)
(1x)
(2x)
(1x)
(10x)
(4x)
(2x)
22062d_2
8 Connecting cable
NEBU-M12W8-K-15-
N-LE8
(1x)
Not included in delivery:
22062d_3
9 Linear gantry
EXCT
(1x)
5. Mounting
22062d_4
Secure th
e multi-pin plug distributor 1 to the adapter plate 2 by using
the screws 7 3 and the nuts .
22062d_5
Secure th
e adapter plate to the Z-axis of the linear gantry 2 9 by using
the screws 6.
22062d_6
Screw cover caps
5 onto the unused ports.
6. Screw sizes and tightening torques M
A
1)
EADH-E17-MP1 5
5
5
55 [Nm] 6
6
6
66 [Nm] 7
7
7
77 [Nm]
ISK-M8 0.5 M4x6 2.9 M4x20 1
7. Electrical installation
Lay the connecting cable 8 9 in the linear gantry ( Further applicable
documents).
Connect the connecting cable 8 1 to the multi-pin plug distributor
( Further applicable documents).
1)
Tolerances for tightening torque M
A
without indication of tolerance
M
A
š 1 Nm: ± 30 %
M
A
, 1 Nm: ± 20 %
1
3
2
4
5
6
7
9
8
1
2
3
7
6
2
9
5
Produkspesifikasjoner
| Merke: | Festo |
| Kategori: | Ikke kategorisert |
| Modell: | EADH-E17-MP1 |
Trenger du hjelp?
Hvis du trenger hjelp med Festo EADH-E17-MP1 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Festo Manualer
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
31 Mars 2025
31 Mars 2025
Ikke kategorisert Manualer
- Holzmann
- Alluserv
- Digital Watchdog
- Nedis
- Cramer
- Bluebird
- Envertech
- Comprehensive
- Vox
- Bissell
- Estella
- Rowenta
- AENO
- Hacienda
- Fiamma
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025