Festo EAHF-E24-60-P-S Bruksanvisning
Festo
Ikke kategorisert
EAHF-E24-60-P-S
Les nedenfor 📖 manual på norsk for Festo EAHF-E24-60-P-S (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 15 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 8 brukere
Side 1/1
EAHF-E24-...-P-S
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8203075
2023-12
[8203077]
8203075
Translation of the original instructions
© 2024 all rights reserved to Festo SE & Co. KG
1
Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Product Content
Operating instruction Axis ELGD –
Tab. 1:
Applicable documents
2 Safety
2.1 Safety instructions
–Only mount the product on components that are in a condition to be safely
operated.
2.2
Intended use
The profile mounting attaches an axis ELGD to a mounting surface by the basic
profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3
Additional information
–Contact the regional Festo contact if you have technical problems
è
www.festo.com.
–Accessories
è
www.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
Fig. 1:
Scope of delivery
1
Profile mounting (2x)
4.2
Not in scope of delivery
2
3
Fig. 2:
Not included in the scope of
delivery
2
Axis ELGD (1x)
3
M6 screw (2x)
5
Assembly
Fig. 3: Determine support spacings and mounting points
• Determine the required support spacingsL and the mounting points of the
axis Other applicable documents.è
1
2
A
B
Fig. 4: Positioning profile mountings
•
Position the profile mountings[1] at the mounting points.
Ä
The lug[A] lies in the slot[B] of the axis[2].
1
3
2
Fig. 5:
Installing profile mountings
1.
Select the suitable screws[3] for the installation situation.
2.
Press the profile mounting[1] against the axis[2].
Ä
The profile mounting[1] is flush with the axis[2].
3. Fasten the profile mountings[1] on the mounting surface with the screws[3].
Maximum tightening torque:7.6Nm
4.
Repeat the mounting steps for all mounting points.
Produkspesifikasjoner
| Merke: | Festo |
| Kategori: | Ikke kategorisert |
| Modell: | EAHF-E24-60-P-S |
Trenger du hjelp?
Hvis du trenger hjelp med Festo EAHF-E24-60-P-S still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Festo Manualer
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
31 Mars 2025
31 Mars 2025
Ikke kategorisert Manualer
- Roidmi
- Comica
- Bang Olufsen
- EXO
- Foster
- BeamZ
- Jocel
- LightZone
- Browin
- Scheppach
- Energizer
- Gaggia
- Unitech
- Sophos
- Physa
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025