Festo EAHT-E9-FB-3D-30 Bruksanvisning
Festo
Ikke kategorisert
EAHT-E9-FB-3D-30
Les nedenfor 📖 manual på norsk for Festo EAHT-E9-FB-3D-30 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 10.5 brukere
Side 1/1
Assembly instructions (Original instructions)
8079181
2017-09a
[8079183]
†‡
Mounting kit
EAHT-E9-FB-3D-30
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Further applicable documents
All available documents for the product www.festo.com/pk
Observe further applicable documents:
Description of the planar surface gantry 4 and actuator 5
Assembly instructions of profile mounting attachment 6 and
connection kit 7
2. Safety
Switch off power supply before mounting work.
Comply with tightening torques ( Table).
3. Intended use
Mounting of a Z-axis 5 to the Y-axis of the planar surface gantry 4.
4. Additional information
Centring sleeve (B) www.festo.de/catalogue
5. Scope of delivery
2227
6d_1
1 Mounting kit
2 Screw
3 Cylindrical
dowel pin
(1x)
(2x)
(2x)
6. Not in scope of delivery
2227
6d_2
4 Planar surface
gantry
EXCM-30
(1x)
2227
6d_3
5 Z-axis
1)
DGSL-8/-10/-12
EGSC-25/-32
2)
EGSK-20/-26
EGSL-35
(1x)
2227
6d_4
6 Profile mounting
attachment
EAHF-L2-25-P
7 Connection kit
EAHT-AE-3D
(1x)
(1x)
7. Mounting
7a. I
n
terface to planar surface gantry 4
4
4
44
22276d_5
Place the mounting kit 1
with cylindrical dowel
pins 3 at slide unit (A)
of the Y-axis of the planar
surface gantry 4.
Tighten the screws 2.
7b. Interfaces of Z axis 5
5
5
55
Mounting components and tightening torques ( Table).
For DGSL-8/-10
22276d_6
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For DGSL-12
22276d_7
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
1 2
1)
Mounting components are not included in the scope of delivery of Z-axis 5.
2)
In case of EGCS-25/-32 with a stroke of 25, mounting is not possible.
For EGSC-25
22276d_13
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSC-32
22276d_12
Place the profile mounting attachments 6 along the Z-axis 5 ( Further
applicable documents).
Position of Z-axis 5 1 on the mounting kit .
Mount the profile mounting attachments 6 to the mounting kit 1 with
the screws (C).
For EGSK-20
22276d_9
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
3)
3)
Tolerances for tightening torques M
A
without specification of tolerance
M
A
= 1.2 Nm: ± 10 %
M
A
, 1.2 Nm: ± 20 %
For EGSK-26
22276d_10
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
For EGSL-35
22276d_8
Position centring sleeves (B).
Position of Z-axis 5 1 on the mounting kit .
Tighten the screws (C).
7c. I
nterface to connection kit 7
7
7
77
2227
6d_1
1
Observe assembly
instructions for connection
kit 7 ( Further applicable
documents).
8. Screw sizes and tightening torques M
A
3)
EAHT-E9- 2
2
2
22 [Nm]
FB-3D-30 M4x10 2.5
Not in scope of d
elivery:
Z-axis 5
5
5
55 Centring sleeve (B) (C) Screw ISO 4762 [Nm]
DGSL-8/-10 ZBH-7 (2x) M4x10-8.8 (2x) 2.0
DGSL-12 ZBH-7 (2x) M5x12-8.8 (2x) 3.0
EGSC-25/-32 – – M4x8-8.8 (4x) 2.0
EGSK-20 – – M3x6-8.8 (4x) 1.2
EGSK-26 – – M4x6-8.8 (4x) 2.5
EGSL-35 ZBH-7 (2x) M4x12-8.8 (4x) 2.5
9. Prior to commiss
ioning
Note
Collision!
The mounting kit reduces the available Y-stroke of the planar surface
gantry 4 by 16 mm.
Check Z-axis 5 for collision.
Set the end stops of the Y-axis at the planar surface gantry 4 ( Further
applicable documents).
4
1
3
2
4
3
1
A
7
1
7
1
5
B
C
1
5
B
C
1
5
B
C
2
6
5
1
5
C
6
1
5
C
6
1
5
C
1
5
C
Produkspesifikasjoner
| Merke: | Festo |
| Kategori: | Ikke kategorisert |
| Modell: | EAHT-E9-FB-3D-30 |
Trenger du hjelp?
Hvis du trenger hjelp med Festo EAHT-E9-FB-3D-30 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Festo Manualer
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
31 Mars 2025
31 Mars 2025
Ikke kategorisert Manualer
- TK Audio
- Microsoft
- Konig & Meyer
- Acti
- Shoprider
- HammerSmith
- Totolink
- Inverx
- DB Technologies
- WHD
- Royal Catering
- Storm
- Lowel
- Royal Sovereign
- MGL Avionics
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025