Festo EAPR-E17-S Bruksanvisning
Festo
Ikke kategorisert
EAPR-E17-S
Les nedenfor 📖 manual på norsk for Festo EAPR-E17-S (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 21 personer og ble vurdert med 4.2 stjerner i gjennomsnitt av 11 brukere
Side 1/1
Assembly instructions (Original instructions)
8079064
2017-09a
[8079066]
†‡
Sensing kit
EAPR-E17-S
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Further applicable documents
All available documents for the product www.f
esto.com/pk
Observe further applicable documents:
Description of the linear gantry aJ
Operating instructions for the proximity sensor 5
2. Safety
Switch off power supply and compressed air before mounting work.
Comply with tightening torques ( Table).
Secure mounting components 3 4, , 6 8 9 and with adhesive .
Observe the safety data sheet of the adhesive 9 from the original
manufacturer.
3. Use for intended purpose
Sensing kit EAPR-E17-S:
Mounting for the proximity sensor 5 as limit switch on the Y-axis of the
linear gantry aJ.
4. Scope of delivery
22055d_1
1 Retainer
2 Switch lug
3 Screw
4 Screw
5 Proximity sensor
SIES-Q8B
6 Threaded pin
7 Adapter
8 Screw
9 Adhesive
LOCTITE 243
(1x)
(1x)
(1x)
(1x)
(1x)
(2x)
(1x)
(2x)
(1x)
5. Not in scope of delivery
22055d_2
aJ Linear gantry
EXCT
(1x)
6. Mounting
22055d_3
Att
ach switch lug 2 with the screw 3 to the retainer 1.
Place the proximity sensor 5 7 on the adapter .
Cable of the proximity sensor 5 is not in the working space.
Mount the proximity sensor 5 8 with the screws .
22055d_4
Place the reta
iner 1 to the left or right on the slide of the Y-axis of
the lineargantry aJ.
Mount the retainer 1 4 with the screw .
Place the adapter 7 on the rail of the Y-axis on the linear gantry aJ.
Attach the adapter 7 6 with the threaded pins .
22055d_5
Push switc
h lug 2 against the proximity sensor 5.
Adjust switch lug 2.
Sensing distance ≤ 1 mm
Tighten screw 3.
Position the proximity sensor 5 at the required location.
Tighten threaded pins 6.
Adapter 7 is clamped.
Attach the cable of the proximity sensor 5, e. g. in the profile slot or to
the mounting plate (A).
7. Screw sizes and tightening torques M
A
1)
EAPR-E17-S 3
3
3
33 [Nm] 4
4
4
44 [Nm] 6
6
6
66 [Nm] 8
8
8
88 [Nm]
M4x6 2.9 M4x16 2.9 M3x4 1 M3sx8 0.8
1)
Tolerance for tightening torque M
A
without indication of tolerance ± 20 %
3
2
1
4
5
6
7
8
aJ
9
5
1
2
3
7
8
7
6
4
1
aJ
2
3
5
7
6
A
Produkspesifikasjoner
| Merke: | Festo |
| Kategori: | Ikke kategorisert |
| Modell: | EAPR-E17-S |
Trenger du hjelp?
Hvis du trenger hjelp med Festo EAPR-E17-S still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Festo Manualer
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
31 Mars 2025
31 Mars 2025
Ikke kategorisert Manualer
- Little Giant
- Sophos
- Peak Design
- RF-Links
- Comprehensive
- Starlyf
- Real Cable
- Bunn
- Alfatron
- EQ Acoustics
- Fresh N Rebel
- Salter
- Lenovo
- SmallRig
- Akasa
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025