Festo EHAM-MA-E19-25-V3 Bruksanvisning
Festo
Ikke kategorisert
EHAM-MA-E19-25-V3
Les nedenfor 📖 manual på norsk for Festo EHAM-MA-E19-25-V3 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 12 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 6.5 brukere
Side 1/2
EHAM-MA-E19-25-V3
Adapter plate kit
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Assembly instructions
8159352
2021-08
[8159354]
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1
Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Product
User documents Actuators
User documents Modules
Tab. 1:
Applicable documents
2 Safety
2.1
Safety instructions
–Before working on the product, switch off the power supply and secure it
against being switched on again.
–
Observe further applicable documents.
–Observe tightening torques.
2.2 Intended use
2.2.1 Use
Connection of modules and actuators.
2.2.2 Permissible components
Module Adapter plate kit Actuator
VAEM
VTOF (with mounted module
VAEM)
EHAM-MA-E19-25-V3 EGSC-...-25
EGSC-...-32
EGSK-20
EGSK-26
Tab. 2:
Permissible components
3 Additional information
–Contact the regional Festo contact if you have technical problems
è
www.festo.com.
–Accessories and spare parts
è
www.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
234
5
Fig.1
1
Adapter plate (1x)
2
Centring pin (6x)
3
Screw (4x)
4
Centring ring (4x)
5
Screw (4x)
The kit contains all the mounting attachments that may be required. Some
mounting attachments will be left over.
4.2 Not in scope of delivery
6
7
Fig.2
6
Actuator (1x)
Mini slide EGSC
Electrical slide EGSK
7
Modul (1x)
Dispense head VTOF (with mounted
module VAEM)
Valve control module VAEM
5
Assembly
5.1 Preparation
• Observe the labelling on the adapter plate.
P
QQ
Fig. 3: Front side of the adapter plate
P
Drilled holes for screws
A EGSK-26
B EGSK-20
C EGSC-...-25
D EGSC-...-32
Q
Drilled holes for module
S
Fig. 4: Rear side of the adapter plate
S
Drilled holes for centring pins
A EGSK-26
B EGSK-20
C EGSC-...-25
D EGSC-...-32
5.2 Connection VTOF/VAEM with EGSC/EGSK
2
3
6
1
P
S
Fig. 5:
Mounting adapter plate on actuator
EGSC-...-25 EGSC-...-32 EGSK-20 EGSK-26
2Centring pin ZBS-2 ZBS-4 ZBS-2 ZBS-5
3Screw M3x8 M4x8 M3x8 M4x8
[Nm] 1.2 ± 20% 2.9 ± 10% 1.2 ± 20% 2.9 ± 10%
[P] Drilled hole C-C D-D B-B A-A
[S] Drilled hole C-C D-D B-B A-A
Tab. 3:
Screw sizes and tightening torques
1. Position two centring pins in the corresponding drilled holes [S].2
2.
Place the adapter plate over the centring pins on the actuator .1 2 6
3. Fasten the adapter plate with the screws over the corresponding drilled1 3
holes [P] on the actuator .6
Produkspesifikasjoner
| Merke: | Festo |
| Kategori: | Ikke kategorisert |
| Modell: | EHAM-MA-E19-25-V3 |
Trenger du hjelp?
Hvis du trenger hjelp med Festo EHAM-MA-E19-25-V3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Festo Manualer
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
31 Mars 2025
31 Mars 2025
Ikke kategorisert Manualer
- Girmi
- YA-MAN
- Statron
- Tangent
- IK Multimedia
- Carry-on
- AddLiving
- Prebena
- Sangean
- IFi Audio
- Ridem
- LiveU
- Geuther
- Nethix
- Ambiano
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025