Fluke 80T-150UA Bruksanvisning
Fluke
Ikke kategorisert
80T-150UA
Les nedenfor 📖 manual på norsk for Fluke 80T-150UA (6 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 9 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 5 brukere
Side 1/6

®
80T-150UA
Universal Temperature Probe
Instruction Sheet
80T-150U
TEMPERATURE PROBE
C
F
OFF
Introduction
The Model 80T-150UA Universal Temperature Probe is a self-contained
temperature-to-voltage converter. The probe is designed to provide a
direct temperature reading when it is connected to any high impedance
DMM that is capable of 1 mV resolution and at least a 300-count full
scale readout capability. Output is 1 mV per degree (Celsius or
Fahrenheit). Two switch-selected temperature output scalings are
provided: -50 to +150 °C or -58 to +302 °F. The probe will stand off 60 V
dc or 30 V ac rms (42.4 V peak).
The unit is housed in two separate but attached assemblies: a
temperature probe and a temperature-to-voltage converter. The probe
contains the temperature-sensing element and is electrically connected to
the temperature-to-voltage converter through a 46-inch cable. A three-
position switch on the converter acts as a power switch and is used for
selecting Celsius or Fahrenheit scaling for the output. Two banana plugs
with standard 0.75-inch spacing are provided for connecting the 80T-
150UA to the DMM.
Operating power for the 80T-150UA is derived from a standard 9 V
battery. Typically, an alkaline battery provides more than 600 hours of
continuous operation before replacement is necessary. An OFF switch is
provided on the temperature-to-voltage converter to allow battery
conservation when the unit is not in use. In addition, the OFF position of
the power switch allows the battery condition to be determined via the
external DMM.
Temperature is measured by exposing the probe tip directly to the
material to be measured (non-corrosive liquid, gas, or solid). A direct
temperature reading is displayed on the DMM.
Symbols
XWarning: Risk of electric shock. Refer to the manual for
information.
W Attention: Refer to the manual for information about this
feature.
PN 3208738
February 2008 , Rev.1, 6/09
© 2008-2009 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
Produkspesifikasjoner
| Merke: | Fluke |
| Kategori: | Ikke kategorisert |
| Modell: | 80T-150UA |
| Produkttype: | Testsonde |
| Vekt: | 150 g |
| Dybde: | 1360 mm |
| Strømkilde: | Batteri |
| Batterilevetid: | 600 timer |
| Antall per pakke: | 1 stykker |
| Lengde: | 1360 mm |
| Batteriteknologi: | Alkalinsk |
| Batteritype: | 9V |
| Produktfarge: | Black, Red |
| Batterispenning: | 6.5 V |
| Driftstemperatur (T-T): | 0 - 50 °C |
| Oppbevaringstemperaturomåde (Celsius): | -40 - 70 °C |
| Driftshøyde: | 0 - 3048 m |
| Relativ luftfuktighet under drift (H-H): | 0 - 90 |
| Videoopptaksgrensesnitt: | Bananplugger |
| Støttede plasseringer/plasseringer som kan benyttes: | Håndholdt multimeter |
| Kontaktplettering: | Nickel |
| Maksimal driftshøyde: | 3048 m |
| Intervall for temperaturmåling: | -50 - 150 °C |
| Temperatur måleområde: | -58 - 302 °F |
| Oppløsning (DC-spenning): | 1 mV |
| Maksimal lagringshøyde: | 15240 m |
| DC-spenning (maks): | 60 V |
| Temperatur nøyaktighet: | 3.6 °C |
| Termoelement type: | Type K |
| Kontaktdiameter: | 31 mm |
Trenger du hjelp?
Hvis du trenger hjelp med Fluke 80T-150UA still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Fluke Manualer
1 September 2025
1 September 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
31 August 2025
Ikke kategorisert Manualer
- TONI&GUY
- Dito Sama
- Prime3
- My Wall
- MBM
- New Pol
- Knog
- Elation
- NuPrime
- Violectric
- Hilti
- REMKO
- Avid
- Expressive E
- NEO Tools
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025