Fluke SureGrip 80PT-25 Bruksanvisning

Fluke Ikke kategorisert SureGrip 80PT-25

Les nedenfor 📖 manual på norsk for Fluke SureGrip 80PT-25 (5 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 3 brukere

Side 1/5
®
80PT-25
SureGrip
TM
Piercing
Temperature Probe
Instruction Sheet
XWWarning
To avoid electrical shock, do not use this
probe when voltages exceeding 24 V ac rms
or 60 V dc are present. The probe tip is
electronically connected to the output
terminals.
Introduction
The 80PT-25 SureGrip
TM
Piercing Temperature Probe is
designed for use in liquids, gels, soft, and semi-hard
materials. The probe is made of 316 stainless steel, which
is suitable for food service use. The thermocouple junction
of the probe is protected from tip to handle by the stainless
steel sheath. The 40-inch (1-meter) cable is terminated
with a Type T miniature thermocouple connector with
0.792-mm (.312-inch) pin spacing. The 80PT-25 can be
used with any temperature-measuring instrument that is
designed to accept Type T thermocouples and has a
miniature connector input.
Specifications
Type
T, Copper/Constantan
Measurement Range of Stainless Steel Probe
-196 °C to 350 °C (-320.8 °F to 662 °F)
Accuracy
(With respect to ANSI MC96.1 Standard Limits of Error)
Note
All error calculations should be done in
°
C and
then scaled to
°
F.
Range Accuracy
(% of reading)
-196 °C to -150 °C
(-320.8 °F to -238 °F)
±3 %
-150 °C to -40 °C
(-238 °F to -40 °F)
±2 °C
-40 ° °C to 0 C
(-40 °F to 32 °F)
±1 °C
0 °C to 350 °C
(32 °F to 662 °F)
Max
(±1 °C, ±0.75 % of reading)
November 20 4 0
© 2004 Fluke Cor oratio . rig ts r ser ed. p n All h e v
All product names are trademarks of their respective companies

Produkspesifikasjoner

Merke: Fluke
Kategori: Ikke kategorisert
Modell: SureGrip 80PT-25

Trenger du hjelp?

Hvis du trenger hjelp med Fluke SureGrip 80PT-25 still et spørsmål nedenfor, og andre brukere vil svare deg