FoneStar VINYL-13 Bruksanvisning

FoneStar Høyttaler VINYL-13

Les nedenfor 📖 manual på norsk for FoneStar VINYL-13 (16 sider) i kategorien Høyttaler. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
VINYL-13
HI-FI BELT DRIVE TURNTABLE
GIRADISCOS HI-FI BELT DRIVE
TOURNE-DISQUES HI-FI BELT DRIVE
GIRA-DISCOS HI-FI BELT DRIVE
INSTRUCTION MANUAL/MANUAL DE USUARIO/
MODE D’EMPLOI/MANUAL DE INSTRUÇÕES
CONTROLS AND FUNCTIONS
1.- Adapter for 7” vinyl record.
2.- Counterweight.
3.- Anti-skating control.
4.- Cueing lever.
5.- Clamp for locking the arm.
6.- Pitch speed control.
7.- 33-45: playback speed selectors.
8.- Headshell.
REAR PANEL
9.- : turntable output level selector: phono level or line level. PHONO/LINE
10.- Turntable output, 2 x RCA connectors. The output level can be selected with the PHONO/LINE selector.
11.- Power supply input for mains adapter provided.
- 2 -
EN
TONEARM WEIGHT ADJUSTMENT
1.- Remove the needle protector.
2.- Position the ANTI-SKATING control at 0.
3.- Place the cueing lever in the down position . /
4.- Release the tonearm and position it parallel to the platter, in the free space between the platter and the
tonearm rest, being careful not to damage the needle.
5.- Hold the tonearm gently by the headshell and level it by turning the counterweight to the left or to the
right. The adjustment is completed when the tonearm is parallel to the record above the platter and does
not lean towards the counterweight or towards the capsule when it is released.
6.- Place the tonearm on the tonearm rest and fasten it with the clip.
7.- Keep the counterweight in the set position and only turn the scale ring until the 0 mark is in line with the
mark printed on the axis of the tonearm.
8.- Then adjust the weight of the needle above the record: turn the scale ring along with the counterweight
to the grams required in accordance with the characteristics of the cartridge being used. If using the
cartridge provided, the counterweight must be adjusted to 1.5 to 2.5 grams.
ANTI-SKATING CONTROL ADJUSTMENT
Place the ANTI-SKATING control at the same value selected on the scale ring so that it corresponds to the
weight of the needle on the record. If the weight is 2 grams, the control must be set at value 2.
CONNECTION
- Connect the turntable to the power supply.
- Connect the turntable output (2 x RCA connectors) to the input of a device with phono level or line level.
Place the PHONO/LINE switch in the appropriate position depending on the type of input to be connected
to the turntable.
- 3 -
EN

Produkspesifikasjoner

Merke: FoneStar
Kategori: Høyttaler
Modell: VINYL-13

Trenger du hjelp?

Hvis du trenger hjelp med FoneStar VINYL-13 still et spørsmål nedenfor, og andre brukere vil svare deg




Høyttaler FoneStar Manualer

Høyttaler Manualer

Nyeste Høyttaler Manualer