Impact RST-001 Bruksanvisning

Les nedenfor 📖 manual på norsk for Impact RST-001 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 3.5 stjerner i gjennomsnitt av 10.5 brukere

Side 1/2
www.impactstudiolighting.com
RST-001
Posing Stool
ASSEMBLY INSTRUCTIONS
Parts List
1 – seat cushion
1 – mounting plate
4 – 1/2˝ screws
1 – pneumatic cylinder
1 – pedestal base
5 – pedestal feet
Specications
Weight capacity: 220.5 lb. (100 kg)
Height: 20 to 30 in. (50.8 to 76.2 cm)
Base diameter: 22 in. (55.9 cm)
Seat diameter: 14 in. (35.6 cm)
Feet type: Pedestal
Material: Chrome-plated steel cylinder,
high-impact nylon
seat cushion
1/2˝ screws
mounting
plate
pneumatic
cylinder
pedestal
base
pedestal
feet
Step One
Remove all the parts from the carton and make
certain you have all the items in the parts list
above and in the correct quantity.
Step Two
Insert the pedestal feet into the pedestal base.
Be sure all feet are inserted securely.
Step Three
Insert the pneumatic cylinder into the
pedestal base.
Step Four
Attach the mounting plate to the seat
cushion using the four 1/2˝ screws.
Tighten the screws rmly.
Step Five
Push the mounting plate and the seat
cushion down onto the pneumatic cylinder
until it is secure.
To adjust the seat height, pull up on the lever and
either push down on the seat to lower or pull up
to raise the height. Make certain all screws are
tightened fully before using this stool.

Produkspesifikasjoner

Merke: Impact
Kategori: Ikke kategorisert
Modell: RST-001

Trenger du hjelp?

Hvis du trenger hjelp med Impact RST-001 still et spørsmål nedenfor, og andre brukere vil svare deg