Joy-it RB-Heatsink5 Bruksanvisning

Joy-it Ikke kategorisert RB-Heatsink5

Les nedenfor 📖 manual på norsk for Joy-it RB-Heatsink5 (5 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/5
ACTIVE COOLING UNIT FOR RASPBERRY PI 5
RB-Heatsink5
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - D-47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer
Thank you for choosing our product. In the following, we will show you
what you need to bear in mind during commissioning and use. Should you
encounter any unexpected problems during use, please do not hesitate to
contact us.
First insert the fan unit into the heat sink and mount it using the four screws
provided.
Now completely remove the protective lm from the thermal pads and place
them on your Raspberry Pi.
ATTENTION! There is a protective lm on both the front and back of the heat
conducting pads. Both must be removed before tting.
1. GENERAL INFORMATION
2. ASSEMBLY
Now place the heat sink on your Raspberry Pi.
Now mount it from the underside of your Raspberry Pi using the two
enclosed screws and washers.
Now insert the fan cable into the fan connection of your Raspberry Pi.
The fan is now ready for use. A separate installation and/or conguration is
not required.

Produkspesifikasjoner

Merke: Joy-it
Kategori: Ikke kategorisert
Modell: RB-Heatsink5

Trenger du hjelp?

Hvis du trenger hjelp med Joy-it RB-Heatsink5 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Joy-it Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer