Jung W8180 Bruksanvisning

Jung Bryter W8180

Les nedenfor 📖 manual på norsk for Jung W8180 (15 sider) i kategorien Bryter. Denne guiden var nyttig for 25 personer og ble vurdert med 4.1 stjerner i gjennomsnitt av 13 brukere

Side 1/15
Automatic Switch 180 Automatic Switch 180
Ref.-no.: W 8180
W 8280
Operating Instructions
WG 800 Automatic Switch 180
1. Safety Instructions
may only be performed by a qualified electrician. Not suitable for
safety disconnection.
To avoid electric shock, safely disconnect the automatic switch
(switch o the automatic circuit breaker) prior to working on it, or
before changing the lamp.)
Non-observance of these installation instructions may cause re or
other hazards.
2. Function
Function Principle
The automatic switches respond to thermal movements initiated by
persons, animals or objects and trigger a switching process. The
automatic switches remain switched on as long as some movements are
detected, otherwise they will switch off after their shut-off delay time has
elapsed. Optionally, the automatic Switch can also be set to short-time
operation. This facilitates the activation of acoustic signal transmitters
(bell) to observe an entrance door. The automatic switches have been
designed for operation together with a switching insert.
Important: These automatic switches are not suitable for alarm systems.
Depending on the lens used, the nominal installation height is
1.10 or 2.20 m.
The 2.20 m lens automatic switches can also be installed at
the height of 1.10 m.
Stand: Jul-10 825 187 03

Produkspesifikasjoner

Merke: Jung
Kategori: Bryter
Modell: W8180

Trenger du hjelp?

Hvis du trenger hjelp med Jung W8180 still et spørsmål nedenfor, og andre brukere vil svare deg