Panduit MIM125 Bruksanvisning

Les nedenfor 📖 manual på norsk for Panduit MIM125 (14 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/14
MIM094, MIM125 or MIM187
PA25213A01
Rev. 01 8-2007
METAL INDENTING MACHINE
OPERATION MANUAL
© Panduit Corp. 2007
The PANDUIT Metal Indenting Machine is a manually operated device to stamp desired legends into
PANDUIT marker plates or tags, and PANDUIT P
AN-STEEL stainless steel cable ties or strapping.
MIM – Metal Indenting Machine
MIM094 - Indenting Machine with 3/32" (2.38mm) character wheel
MIM125 - Indenting Machine with 1/8" (3.18mm) character wheel
MIM187 - Indenting Machine with 3/16" (4.77mm) character wheel
MIW – Metal Intending Wheels
MIW094 - 3/32" (2.38mm) character wheel kit
MIW125 - 1/8" (3.18mm) character wheel kit
MIW187 - 3/16" (4.77mm) character wheel kit
Website: www.panduit.com
E-mail: cs@panduit.com
Technical Support:
888-506-5400, ext. 3255
Fax: (630) 759-7532
MIM094 / MIM125 / MIM187 OPERATION MANUAL
PA25213A01_01 Page: 1 of 13 8-2007
TABLE OF CONTENTS
SECTION 1 .............................................................................................................................2
SPECIFICATIONS
SECTION 2 .............................................................................................................................2
UNCRATING PROCDURE
SECTION 3 .............................................................................................................................4
FUNCTION OF CONTROLS
SECTION 4 .............................................................................................................................5
ADJUSTMENTS FOR STAMPING
SECTION 5 .............................................................................................................................9
TO STAMP MARKER PLATES
SECTION 6 .............................................................................................................................9
TO STAMP STAINLESS STEEL CABLE TIES AND STRAPPING
SECTION 7 ...........................................................................................................................10
CHARACTER DIAL AND SPACING RACK REMOVAL & INSTALLATION
SECTION 8 ...........................................................................................................................12
LUBRICATION AND MAINTENANCE
SECTION 9 ...........................................................................................................................13
CONTACT INFORMATION
MIM094 / MIM125 / MIM187 OPERATION MANUAL
PA25213A01_01 Page: 2 of 13 8-2007
SECTION 1: SPECIFICATIONS
Dimensions
Height: 12" (305mm)
Width: 10" (254mm)
Depth: 18" (457mm)
Weight: 41 lbs. (18.6kg)
SECTION 2: UNCRATING PROCEDURE
1. Remove the cardboard liner in the shipping container.
2. The Metal Indenting Machine may now be removed directly upward.
The press weighs 41 pounds (18.6kg) and should be lifted with caution.
3. The aluminum base attached to the press should remain attached. The base will allow for added
stability and will not restrict handle travel.
4. Place the press on a stable work surface to avoid accidental upset.
5. Any shipping damage to the press must be reported immediately to the common carrier and to
PANDUIT.
NOTE: In the interest of higher quality and value, we are constantly improving and
updating our products. Consequently, pictures in this manual may
sometimes vary from the product enclosed.

Produkspesifikasjoner

Merke: Panduit
Kategori: Ikke kategorisert
Modell: MIM125

Trenger du hjelp?

Hvis du trenger hjelp med Panduit MIM125 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Panduit Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer