PDP REALMz Wireless Plus Controller Bruksanvisning

PDP Ikke kategorisert REALMz Wireless Plus Controller

Les nedenfor 📖 manual på norsk for PDP REALMz Wireless Plus Controller (22 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/22
REALMz™
Wireless
Plus
Controller
Quick Start Guide
500-
246
For:
Nintendo
Switch
Nintendo
Switch
–
OLED
Model
Nintendo
Switch
is
a
trademark
of
Nintendo.
©
2023
Nintendo
English
Deutsch
Dansk
Español
Français – Canada
Français
Italiano
Polski
Português
English
NOTICE: Before using the controller, we recommend fully charging it as it will only have an hour or two of battery life out of the
box.
1.
Pairing
the
Controller
A.
Turn
on
your
Nintendo
Switch™
device
and
press
any
button
on
the
controller.
B.
If your controller does not automatically connect, it will need to be paired with the device.
C.
Using
the
Joy-Con™
controllers,
navigate
to
Controllers
>
Change
Grip/Order.
D.
Now, using your controller, press and hold the sync button (at the top of the controller by the charging port) for
3 seconds until it pairs and the player indicator light at the bottom is solid.
Tip: To unpair the controller from the Nintendo Switch, hold down the sync button (located at the top of the
controller) for at least 1 second.
2.
Re-connecting
the
Controller
A.
If the controller is not connecting with the device, but has already been paired, simply go into
Controllers >
Change Grip/Order.
B.
When
prompted,
press
L
and
R
on
your
controller
to
connect.
Tip
:
You
can
also
press
and
hold
the
“Home” button to
wake
up
the
controller
and
Nintendo
Switch™ device.
3.
Charging the Controller
A.
When the controller is low on battery, the “function” button’s LED (located at the center of the controller
between
the
+
and
–
buttons)
will
blink
RED
every
30
seconds.
B.
Using
the
included
USB-C
cable,
connect
the
controller
to
one
of
the
USB
ports
on
the
Nintendo Switch
dock.
C.
While
charging,
the
“function”
button’s
LED
will
pulse
RED.
When
the
controller
is
fully
charged,
the
LED
will
turn WHITE.
Note:
To
prevent
the
controller
battery
from
completely
draining
out,
please
charge
the
controller
every
3
months
even if it’s not in use.
D.
The REALMz Wireless Controller comes with a 1 ft. USB-C charging cable. To play while charging, longer USB-C
cables are available for purchase on pdp.com.
4.
Change
LED
Lighting
Modes
A.
The
REALMz™
Wireless
Controller
comes
with
four
different
lighting
effects
pre-programmed
to
the
controller’s
A, B, X, and Y buttons.
B.
To
explore
these
effects
and
cycle
through
them,
hold
the
“function”
button
and
press
either
A,
B,
X,
or
Y.
C.
The REALMz Wireless Controller also comes with a “Collector Mode” light setting that allows you to keep the
controller’s LEDs lit while the controller is connected to the Nintendo Switch dock via a USB-C cable. To enable
these settings, follow the instructions below:
a.
Plug
the
USB
side
of
the
cable
into
the
Nintendo
Switch
dock.
Then,
while
the
controller
is
unplugged,
hold
the
“function”
button
and
D-pad
right,
and
plug
in
the
USB-C
cable
into
the
controller.
D.
To keep the controller paired and lit for extended periods of time, you can disable the auto-sleep settings on
the Nintendo Switch. On your device, navigate to
System Settings > Sleep Mode > Auto Sleep (Connected to
TV) > select “Never.”
Note: When the controller and system turn off, the lighting modes reset to the default mode (the mode for the A
button).
5.
Adjusting
LED
Light
Settings
a.
To adjust the LED brightness, hold the “function” button and press either ZL or the D-pad down
button to decrease brightness, or either ZR or the D-pad up button to increase brightness.
6.
Programming the Back Buttons
A. To program, hold the “function” button and press the back button you’d like to map a control to.
B. Once the “function” button LED is flashing, press any button on the controller to map that button’s function
to the back. The LED will blink quickly 3 times, indicating successful programming.
C. To clear a mapped function or disable the back buttons completely, hold down the “function” button and
double press any back button.
WARNING:
DO
NOT
DISASSEMBLE
THE
CONTROLLER
!
Disassembling the controller to remove the figurine or any other components will void the 2-year manufacturer’s warranty. The
figurine is securely fixed inside the controller and is not designed for removal by users.

Produkspesifikasjoner

Merke: PDP
Kategori: Ikke kategorisert
Modell: REALMz Wireless Plus Controller

Trenger du hjelp?

Hvis du trenger hjelp med PDP REALMz Wireless Plus Controller still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert PDP Manualer

PDP

PDP REALMz Wireless Plus Controller Bruksanvisning

10 August 2025
PDP

PDP Rematch Wireless Motion Bruksanvisning

10 August 2025
PDP

PDP RiffMaster Bruksanvisning

10 August 2025
PDP

PDP REALMz Wireless Controller Bruksanvisning

10 August 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Soundcraft

Soundcraft LX10 Bruksanvisning

10 August 2025
Soundcraft

Soundcraft Series 10 Bruksanvisning

10 August 2025
Ausclimate

Ausclimate EcoSmart Pro ACPH915 Bruksanvisning

10 August 2025
Soundcraft

Soundcraft RM105 Bruksanvisning

10 August 2025
Bravilor Bonamat

Bravilor Bonamat Bolero 32 Bruksanvisning

10 August 2025
Soundcraft

Soundcraft Vienna II Bruksanvisning

10 August 2025
Soundcraft

Soundcraft ViSi Listen Bruksanvisning

10 August 2025
Beverage-Air

Beverage-Air PH1-1HS-PT Bruksanvisning

10 August 2025
Samsung

Samsung DRS425300SR Bruksanvisning

10 August 2025
Beverage-Air

Beverage-Air PH2-1BHG-PT Bruksanvisning

10 August 2025