Pro-User APB120 Bruksanvisning
Pro-User
reversert kamera
APB120
Les nedenfor 📖 manual på norsk for Pro-User APB120 (43 sider) i kategorien reversert kamera. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/43
1
WIRELESS REAR VIEW CAMERA SYSTEM
WITH MIRROR DISPLAY & BLUETOOTH
2.1 HAND FREE SYSTEM
KABELLOSES INNENSPIEGEL RÜCKFAHR-
KAMERA-SYSTEM & BLUETOOTH 2.1
CAMERA DE RECUL SANS FILS & KIT
MAIN-LIBRE BLUETOOTH 2.1
DRAADLOOS CAMERASYSTEEM
& BLUETOOTH 2.1
With built-in 3,5 inch monitor
mit integriertem 3,5” Monitor
Avec écran 3,5 pouces intégré
met 3,5 inch monitor
APB120
2
INTRODUCTION
The Pro-User APB120 is member of the family of advanced car Rear view mirror back up
& Bluetooth 2.1 hand free systems manufactured by Pro User International Ltd.
The Pro-User Wireless Rear view mirror Back-up Camera & Bluetooth 2.1 hand free
systems, when used as described, will improve your ability to see behind your car,
camper, trailer, or mini-van. We have taken numerous measures in quality control to
ensure that your product arrives in top condition, and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
IMPORTANT SAFETY AND PRIVACY
Before You Install
If you are not confident working with 12 volt DC vehicle wiring, removing and reinstalling
interior panels, carpeting, dashboards or other components of your vehicle, contact the
vehicle’s manufacturer, or consider having the camera system professionally installed.
Interference
All wireless devices are susceptible to interference or may cause interference, which
could affect usability.
Privacy
Upon detection of new mobile device (different ID) pairing, the Bluetooth system will
automatically erase all information concerning the previous linked mobile device,
including download phonebook, call log, etc.
Repair
The camera system should not be opened. Any attempt at modification or repair by the
user will entail the loss of your guarantee.
PARTS
1. Rear View Mirror 2. Camera with mounting plate
3. Transmitter Box 4. Mounting Accessories 5. Mirror cigarette DC plug
6. Transmitter Box Power Cable 7.Mirror mounting magic tape 8. Mirror power cable
3
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general
guide due to the number of different makes & models. For vehicle specific
questions contact your vehicle’s manufacturer.
Camera installation
There are several ways to mount the camera on the back of your car. But the most
convenient is to mount it near the license plate of the car. Supplied is one mounting plate
that can be fixed behind the license plate, and the mounting plate have been installed in
the camera.
The camera is tiltable, camera angle can be adjusted manually on vertical direction.
Make
sure that its field of view and detection are not obstructed.
At some type of cars it is not possible to mount the camera near the license plate. You
may have to find another spot at the back of your car to mount the camera.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Position the supplied mounting plates (with camera together) behind the license plate
bracket. Secure both license plate bracket and mounting plates with the license plate
bracket bolts/screws.
Produkspesifikasjoner
| Merke: | Pro-User |
| Kategori: | reversert kamera |
| Modell: | APB120 |
Trenger du hjelp?
Hvis du trenger hjelp med Pro-User APB120 still et spørsmål nedenfor, og andre brukere vil svare deg
reversert kamera Pro-User Manualer
20 September 2025
20 September 2025
20 September 2025
16 September 2025
reversert kamera Manualer
Nyeste reversert kamera Manualer
11 September 2025
10 September 2025
9 August 2025
3 August 2025