QTX VHN2 Bruksanvisning

QTX Mikrofon VHN2

Les nedenfor 📖 manual på norsk for QTX VHN2 (6 sider) i kategorien Mikrofon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 1.5 brukere

Last ned PDF

Side 1/6

V-SERIES

VHF Wireless Systems

User Manual

Version 3.3

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

V-Series VHF Wireless User Manual

Introduction

Thank you for choosing the QTX Sound VHF-series wireless system. This professional wireless set provides a high quality

microphone with VHF radio system for freedom of movement without loss of audio quality. Please read this manual

before using this equipment in order to avoid damage through incorrect operation and to get the best performance from

your purchase.

Contents:

Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…

• VHF wireless receiver

• Mains power adapter

• 6.3mm mono jack lead

• 9V battery, PP3 (2 pieces for VH2, VN2 or VHN2)

• Microphone / transmitter(s) – see table below

Model

Stock code

Microphone 1

Microphone 2

VH1

171.804UK

Handheld transmitter

VH2

171.816UK / 171.817UK

Handheld transmitter

VN1

171.836UK / 171.837UK

Neckband mic. + beltpack

VN2

171.818UK / 171.819UK

Neckband mic. + beltpack

VHN2

171.810UK / 171.811UK

Handheld transmitter

Neckband mic. + beltpack

VL1

171.834UK / 171.835UK

Lavalier mic. + beltpack

Warning

To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.

If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified

personnel before further use.

Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.

No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.

Safety

• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the

adapter.

• Avoid ingress of water or particles into the transmitter(s) or receiver

• Use alkaline or NiMH batteries in the transmitter(s) and remove if unused for long periods.

• Observe the correct polarity when replacing batteries

Placement

• Keep all components out of direct sunlight and away from heat sources.

• Do not place heavy objects on top of the receiver or transmitter(s)

• If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.

• Keep the transmitter(s) and receiver away from damp or dusty environments.

Cleaning

• Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.

• Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes

• To avoid damage, do not use solvents to clean the components

Produkspesifikasjoner

Merke:	QTX
Kategori:	Mikrofon
Modell:	VHN2
Pakkevekt:	570 g
Mikrofontype:	Håndholdt/hodesett-mikrofon
Mottakervekt:	573 g
Mikrofonvekt:	190 g
Antall mikrofoner inkludert:	2
Pakkedybde:	430 mm
Pakkehøyde:	100 mm
Pakkebredde:	320 mm
Antall støttede batterier:	1
Signal-til-støy-forhold (SNR):	85 dB
Total Harmonic Distortion (THD):	0.2
Strømforsyning medfølger:	Ja
Rekkevidde trådløs ruter:	50 m
Mottakertype:	Stasjonær mottaker
XLR utgang:	1
Trådløs mottaker (B x D x H):	45 x 210 x 180 mm
Senderdimensjoner (BxDxH):	205 x 68 x 25 mm
Sendervekt:	76 g
Operativ frekvenstype:	Svært høy frekvens (VHF)
6,35 mm (1/4 tommer) utgang:	1
Drift spenning (modtaker):	10 V
Strømforbruk (mottaker) (maks):	250 mA
Transmittertype:	Håndholdt sender
Radio Frequency (RF)-område:	174.1 - 175 MHz
Mikrofonens strømkildetype:	Batteri
Mottakerskjerm:	Nei
Antall mottakere som medfølger:	1
Antall sendere som medfølger:	2
Senderskjerm:	Nei