Radial Engineering ProMS2 Bruksanvisning
Radial Engineering
Splitter
ProMS2
Les nedenfor 📖 manual på norsk for Radial Engineering ProMS2 (2 sider) i kategorien Splitter. Denne guiden var nyttig for 24 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
www.radialeng.com
USER GUIDE
© Copyright 2013 all rights reserved.
Specications and appearance
are subject to change without notice.
Part# R870 1056 00 / 04-2025
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada
tel: 604-942-1001 • fax: 604-942-1010
info@radialeng.com
Radial Engineering Ltd. ProMS2 Microphone Splitter
FEATURES
1. -30dB PAD: Allows balanced +4dB
line-level sources to connect to the
ProMS2 input.
2. Mic input: Used to connect a low
impedance, balanced, microphone or
direct box.
3. Direct-1 thru: A parallel direct
output used to bridge the mic or D.I.
to the primary mixing console.
4. Bookend design: 14 gauge steel
outer shell creates protective zone
around connectors and switches.
5. Full-bottom no-slip pad: This
provides electrical isolation and
plenty of ‘stay-put’ friction to keep the
ProMS2 in one place.
6. Direct-2 output: Equipped with
ground lift. Used to bridge the signal
to an additional audio device.
7. Lift (Direct-2): Disconnects
pin-1 (ground) on the direct-2 XLR
output to help reduce hum and buzz
caused by ground loops.
8. Isolated output: Transformer-
isolated to eliminate ground loop hum
and buzz. Used to bridge the balanced
mic signal to a second audio system.
9. Lift (Isolated output): Disconnects
pin-1 (ground) on the isolated XLR
output to help further reduce hum and
buzz caused by ground loops.
10. St e e l I- b e am : E n cl o s u r e
eliminates stress that could torque
the PC board.
11. Military-grade PCB: Double-sided
PCB with plated through-holes is
bolted to welded steel standoffs.
12. Eclipse: High performance mic
bridging transformer offers outstanding
au d i o pe r f or m a n c e . F e a t u r es
mu-metal shield for protection against
stray electromagnetic elds.
96 7 8
1 52 3 4
10 11 12
Produkspesifikasjoner
| Merke: | Radial Engineering |
| Kategori: | Splitter |
| Modell: | ProMS2 |
Trenger du hjelp?
Hvis du trenger hjelp med Radial Engineering ProMS2 still et spørsmål nedenfor, og andre brukere vil svare deg
Splitter Radial Engineering Manualer
20 Desember 2024
20 Desember 2024
Splitter Manualer
- Splitter Samsung
- Splitter Ecler
- Splitter Digitus
- Splitter Audio-Technica
- Splitter Fujitsu
- Splitter Hyundai
- Splitter Tripp Lite
- Splitter Smart-AVI
- Splitter Advantech
- Splitter Palmer
- Splitter Manhattan
- Splitter Comprehensive
- Splitter ART
- Splitter Televés
- Splitter Act
Nyeste Splitter Manualer
8 April 2025
28 Mars 2025
21 Februar 2025
21 Januar 2025
21 Januar 2025
17 Januar 2025
16 Januar 2025
15 Januar 2025
8 Januar 2025
6 Januar 2025