Sonneman Nebula 2067.25 Bruksanvisning
Les nedenfor 📖 manual på norsk for Sonneman Nebula 2067.25 (9 sider) i kategorien Lampe. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/9
June 16, 2020
©2020 SONNEMAN - A WAY OF LIGHT 1 of 8
LED Product Information and Warnings
Important
• Always disconnect the power before installing or replacing parts and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact
Customer Service if you have any questions or concerns. Before installation, please conrm that the xture
is compatible with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory
sealed compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges
and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not
replace or substitute with another power supply.
• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance
with local codes. Remote installations should be in an accessible location, as close to the xture as possible.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or
wire them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,
and improper connections may damage the xture.
• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be
eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use
the appropriate hardware for the mounting surface.
June 16, 2020
©2020 SONNEMAN - A WAY OF LIGHT 2 of 8
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Important
• Always disconnect the power before installing or replacing parts and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
1. Shut o power to the outlet box (A).
2. Attach the mounting plate (B) to ceiling using slots and wood screws (C). CAUTION: Fixture must be supported
independent of outlet box. Customer is responsible for ensuring appropriate ceiling construction to support the
weight of the xture.
3. Assemble xture frame (T) according to the Frame Assembly instructions on Page 3.
4. Determine the height at which the xture (T) is to be hung. Install the mounting brackets (P) to the ceiling with
anchors (Q) and screws (R), then screw the posts (S) onto the mounting brackets. Insert cables (B) into posts and adjust to
level the xture: to shorten, push the cable up; to lengthen, push in the plunger while pulling down on the cable, release
the plunger to lock. Support frame using sawhorses (or equivalent) while mounting and leveling.Suggestion:
5. Insert two power cords (D) through corresponding holes in canopy (E).
6. Use the screwdriver (G) to loosen the slotted set screws (H) in the two
cord posts (J). Insert the cords and adjust to the desired length.
Note: Cords must not support xture weight.
Tighten the set screws to set. Reserve extra cord in canopy (E).
7. Make appropriate electrical connections using wire nuts (Appendix A):
a. Connect the two LED driver (U) live wires (black) to the
outlet box live wire.
b. Connect the two LED driver (U) neutral wires (white) to
the outlet box neutral wire.
c. Connect the ground wire (green or uncoated) to the
outlet box ground wire. If no ground is present in outlet
box, connect ground wire to
the mounting plate (B) using
the green screw (included).
d. For each cord, connect the
cord inner conductor to one
of the driver positive (+)
output wire and connect the
cord outer conductor to the
driver negative (-) output wire.
Repeat for the second cord
and second driver.
8. Attach canopy (E) to the
mounting plate (B),
secure with canopy nut (V).
9. Install Cluster Arms and attach
globes (K1, K2, K3) as shown
on pages 4-7.
10. Restore power to
the outlet box (A).
Note
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type
dimmers only.
Care Instructions
• Dusting: Use a clean, dry cloth.
• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.
2067
June 16, 2020
©2020 SONNEMAN - A WAY OF LIGHT 3 of 8
Bar Assembly (Fig. A):
1. Insert Bracket plug into corresponding Bar plug.
2. Slide Bar over Bracket and secure with (2) countersunk screws.
Frame Assembly (Fig. B):
1. Connect Bar B and Bar C to Bar A. Refer to Bar Assembly above.
Fig. B
Top View
Produkspesifikasjoner
| Merke: | Sonneman |
| Kategori: | Lampe |
| Modell: | Nebula 2067.25 |
Trenger du hjelp?
Hvis du trenger hjelp med Sonneman Nebula 2067.25 still et spørsmål nedenfor, og andre brukere vil svare deg
Lampe Sonneman Manualer
3 April 2025
3 April 2025
15 Oktober 2024
15 Oktober 2024
Lampe Manualer
- Lampe Ledlenser
- Lampe AFX
- Lampe Hama
- Lampe Neewer
- Lampe Hazet
- Lampe Philips
- Lampe Topeak
- Lampe Schwaiger
- Lampe Godox
- Lampe IKEA
- Lampe Samsung
- Lampe Sony
- Lampe Xiaomi
- Lampe Trust
- Lampe Integral LED
- Lampe Lutec
- Lampe Golden Lighting
- Lampe ET2
- Lampe Quoizel
- Lampe Crystorama
- Lampe Brennenstuhl
- Lampe Aputure
- Lampe NEO Tools
- Lampe Westinghouse
- Lampe Schneider
- Lampe Dainolite
- Lampe EMOS
- Lampe Nanlite
- Lampe Cameo
- Lampe BeamZ
- Lampe Livoo
- Lampe Steinel
- Lampe Flex
- Lampe Maxim
- Lampe Nordlux
- Lampe Brandson
- Lampe NUVO
- Lampe Maginon
- Lampe Elgato
- Lampe Ansmann
- Lampe Makita
- Lampe Intermatic
- Lampe V-Tac
- Lampe JBL
- Lampe Nedis
- Lampe Elation
- Lampe Fredrick Ramond
- Lampe Chauvet
- Lampe Karma
- Lampe Ridem
- Lampe Dedra
- Lampe Black Diamond
- Lampe Powerplus
- Lampe Ozito
- Lampe BenQ
- Lampe Hansa
- Lampe Livarno Lux
- Lampe Eurolite
- Lampe Casalux
- Lampe Beghelli
- Lampe American DJ
- Lampe Profoto
- Lampe Claypaky
- Lampe Petzl
- Lampe Gravity
- Lampe Ikan
- Lampe AVM
- Lampe Impact
- Lampe Olight
- Lampe Vimar
- Lampe Genaray
- Lampe Altman
- Lampe Setti+
- Lampe Kanlux
- Lampe Xline
- Lampe ARRI
- Lampe Osram
- Lampe Zhiyun
- Lampe Savio
- Lampe Bresser
- Lampe Honeywell
- Lampe Theben
- Lampe ColorKey
- Lampe Perfect Christmans
- Lampe XCell
- Lampe Physa
- Lampe Jinbei
- Lampe Apa
- Lampe Bolt
- Lampe Heitronic
- Lampe HQ Power
- Lampe Currey & Company
- Lampe Deko-Light
- Lampe Cateye
- Lampe Angler
- Lampe Raya
- Lampe Livex Lighting
- Lampe Hinkley Lighting
- Lampe Norwell
- Lampe Ranex
- Lampe COLBOR
- Lampe Lucide
- Lampe Nicols
- Lampe August
- Lampe Dorr
- Lampe Pixel
- Lampe Silva
- Lampe Brilliant
- Lampe Allegri
- Lampe Exagerate
- Lampe Waldmann
- Lampe Kind LED
- Lampe Zafferano
- Lampe Zadro
- Lampe X4-Tech
- Lampe Craftmade
- Lampe Unilux
- Lampe Louis Poulsen
- Lampe Trio Lighting
- Lampe Rotolight
- Lampe SLV
- Lampe Yeelight
- Lampe Falcon Eyes
- Lampe Schonbek
- Lampe Lowel
- Lampe Hoffman
Nyeste Lampe Manualer
8 April 2025
8 April 2025
6 April 2025
6 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025