Soundcore Select 3 Bruksanvisning

Soundcore Vugge/dokkingstasjon Select 3

Les nedenfor 📖 manual på norsk for Soundcore Select 3 (4 sider) i kategorien Vugge/dokkingstasjon. Denne guiden var nyttig for 20 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/4
At a Glance
Strap BassUP Button
Power Button
BassUP LED
Power LED Volume Up Button
Bluetooth LED Play/Pause Button
Bluetooth Button USB-C Charging Port
Volume Down Button
• Use a certified USB-C cable and charger to prevent any damage.
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Powering On / Off
Press or Press and Hold for 2 Seconds
Power On
Steady White
Press and Hold for 2 Seconds
Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select " " from the Bluetooth soundcore Select 3
list to connect.
Select 3
PAIRING
CONNECTED
Press Enter / Exit Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from another connected device,
pause the device that's currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available
within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 soundcore speakers equipped with PartyCast function to synchronize audio
and light.
1. Connect a soundcore speaker to your phone via Bluetooth.
2. Press and hold the Bluetooth button on the speaker for 2 seconds to enter PartyCast pairing mode. The
speaker that's currently connected to your phone becomes the primary speaker.
3. Press and hold the Bluetooth button on each soundcore speaker for 2 seconds to enter PartyCast pairing
mode. They will become secondary speakers.
1
2
3
PAIRING
CONNECTED
PAIRING
CONNECTED
> >2s 2s
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Flashing White PartyCast Pairing
Flashing White (Primary Speaker)
PartyCast Connected
Steady White (Secondary Speaker)
• Double-press the Bluetooth button on a secondary speaker to make it the primary speaker.
Button Controls
Press or Press and Hold for 2 Seconds
Power On
Press and Hold for 2 Seconds Power Off
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press Answer / End a Call
Press and Hold for 2 Seconds Reject a Call
Press
Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Press Volume Up / Down
Press
Bass On/Off

Produkspesifikasjoner

Merke: Soundcore
Kategori: Vugge/dokkingstasjon
Modell: Select 3

Trenger du hjelp?

Hvis du trenger hjelp med Soundcore Select 3 still et spørsmål nedenfor, og andre brukere vil svare deg


Vugge/dokkingstasjon Soundcore Manualer

Soundcore

Soundcore Select 3 Bruksanvisning

27 Desember 2024

Vugge/dokkingstasjon Manualer

Nyeste Vugge/dokkingstasjon Manualer

Bigben

Bigben CBLNEONFLAMS Bruksanvisning

1 April 2025
Crestron

Crestron TSR-310-DS Bruksanvisning

27 Mars 2025
Alogic

Alogic DCAP-SPL Bruksanvisning

12 Mars 2025
Havit

Havit SK900BT Bruksanvisning

12 Mars 2025
Logilink

Logilink UA0410 Bruksanvisning

10 Mars 2025
Divacore

Divacore Blue Lagoon Bruksanvisning

27 Februar 2025
Divacore

Divacore Mojito Bruksanvisning

27 Februar 2025
Havis

Havis PKG-DS-GTC-902-3 Bruksanvisning

16 Februar 2025
Alogic

Alogic DX2 Bruksanvisning

11 Februar 2025
Cyber Acoustics

Cyber Acoustics CA-920 Bruksanvisning

8 Februar 2025