StarTech.com P2CDD143-KVM-SWITCH Bruksanvisning
StarTech.com
Bryter
P2CDD143-KVM-SWITCH
Les nedenfor 📖 manual på norsk for StarTech.com P2CDD143-KVM-SWITCH (1 sider) i kategorien Bryter. Denne guiden var nyttig for 33 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 17 brukere
Side 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: October 10, 2023
2-Port Dual Monitor KVM Switch - DisplayPort - 8K 60Hz - USB-C 10Gbps
Product IDs
P2CDD143-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2CDD143-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in one or two high-pitch beeps. Unsuccessful
hotkey command inputs result in two low-pitched beeps.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1 (Default - Left Side of the Keyboard)
• Left-side + left-side Ctrl Ctrl
Option 1.2 (Right side of the Keyboard)
To enable HK_LCode for the right-side of the keyboard:
• HK_LCode Alt Ctrl Alt+ hold left-side + press right-side + release
To use HK_LCode Option 1.2:
• Right-side + right-side Ctrl Ctrl
To revert back to Option 1.1 (Default):
• HK_LCode Alt Ctrl Alt + hold right-side + press left-side + release
Option 2
• Hold left-side + + + release Shift Num Lock Num Lock Shift
Option 3
• Scroll Lock Scroll Lock +
Hotkey Command Function
HK_LCode 1 ~ 2 + • Select PC 1 or PC 2
HK_LCode F1 + • Start Auto Scan
HK_LCode F2 +
+ or Up Arrow Down
Arrow
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
• Adjust Scan Rate -- KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected
PC when switching (2 high pitched beeps)
• Bound = PC Audio matches the selected PC (1 high
pitched beep)
HK_LCode + A • Force Audio to be bound to the selected PC
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Bryter |
| Modell: | P2CDD143-KVM-SWITCH |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com P2CDD143-KVM-SWITCH still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter StarTech.com Manualer
22 September 2025
14 September 2025
14 September 2025
13 September 2025
5 August 2025
5 August 2025
22 Januar 2025
22 Januar 2025
21 Januar 2025
21 Januar 2025
Bryter Manualer
- H-Tronic
- Hikvision
- Mach Power
- Monacor
- Apc
- CyberPower
- Alcatel
- Kaiser
- Jung
- Yamaha
- Ebara
- Ecler
- Engenius
- Manhattan
- IOGEAR
Nyeste Bryter Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025