StarTech.com P2DD46A2-KVM-SWITCH Bruksanvisning
StarTech.com
Bryter
P2DD46A2-KVM-SWITCH
Les nedenfor 📖 manual på norsk for StarTech.com P2DD46A2-KVM-SWITCH (1 sider) i kategorien Bryter. Denne guiden var nyttig for 31 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 16 brukere
Side 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: May 11, 2023
Dual Monitor KVM Switch - DisplayPort - 4K 60Hz
Product IDs
P2DD46A2-KVM-SWITCH
P4DD46A2-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2DD46A2-KVM-SWITCH
www.StarTech.com/P4DD46A2-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions
and can be used to initiate KVM Switch functions. A hotkey command sequence must
be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful
hotkey command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1
• Scr Lck Scr Lck +
Option 1.2
To change the HK_LCode:
• HK_LCode + H + Esc, Caps, or F12
• Alternatively, press and hold the front for , until 2 beeps Host Selection Button PC2
are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12
Hotkey Command Function
HK_LCode 1 ~ 2 +
or
HK_LCode F1 ~ F2 +
• Select PC 1 or PC 2.
HK_LCode + W
• Disable the binding between PC (USB/Video) and Audio
when switching between PC 1 or PC 2.
• Allows switching of PC Ports USB and Video functions,
while Audio does not switch
HK_LCode + Q
• Enable the binding of PC (USB/Video) and Audio
switching.
• Audio will switch with the PC Ports USB and Video
functions.
• Enabled by default.
HK_LCode F5 ~ F6 +
• Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video
• Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
HK_LCode + Up Arrow
Key
or
HK_LCode + Down
Arrow Key
• Select the next/previous PC Port.
• If Audio is unbound, the audio will not switch
HK_LCode + B • Disable the Beep that indicates HotKey Command
Inputs.
HK_LCode + S • Enable Autoscan.
• Press any key to stop the Autoscan function.
HK_LCode + H + “x”
• Dene the Autoscan time delay.
• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5
- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -
100sec
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Bryter |
| Modell: | P2DD46A2-KVM-SWITCH |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com P2DD46A2-KVM-SWITCH still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter StarTech.com Manualer
22 September 2025
14 September 2025
14 September 2025
13 September 2025
5 August 2025
5 August 2025
22 Januar 2025
22 Januar 2025
21 Januar 2025
21 Januar 2025
Bryter Manualer
- EBERLE
- Inverto
- D-Link
- Triax
- Icy Box
- Blustream
- Rocketfish
- Smart-AVI
- Tripp Lite
- Comet
- ATen
- Suevia
- Manhattan
- IOGEAR
- Panasonic
Nyeste Bryter Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025