StarTech.com P4AD122-KVM-SWITCH Bruksanvisning
StarTech.com
Bryter
P4AD122-KVM-SWITCH
Les nedenfor 📖 manual på norsk for StarTech.com P4AD122-KVM-SWITCH (1 sider) i kategorien Bryter. Denne guiden var nyttig for 27 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 14 brukere
Side 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: November 15, 2023
4-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub
Product IDs
P4AD122-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P4AD122-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey
command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
- Numbers entered during the hotkey sequence cannot be entered using a number pad
HK_LCode
Option 1
• Scr Lck + Scr Lck
Option 2
• Left Ctrl + Left Ctrl
Option 3
• Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift
Hotkey Command Function
HK_LCode 1 ~ 4 + • Select PC 1 ~ PC 4
HK_LCode F1 +
or
Press Port Selection
Buttons 3 & 4
• Start Auto Scan
HK_LCode F2 +
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
or
Press Port Selection
Buttons 1 & 2
• Adjust Scan Rate -- KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected PC
when switching (1 beep)
• Bound = PC Audio matches the selected PC (2 beeps)
HK_LCode + A
• Force Audio to follow selected PC
• If audio was unbound, this command will rebind
audio to switch with the PC ports
Left Shift (Hold) +
Num Lck + Num Lck
+ Release Shift + Left
Ctrl
• Enable or disable hotkey functionality
• Enabled by default
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Bryter |
| Modell: | P4AD122-KVM-SWITCH |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com P4AD122-KVM-SWITCH still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter StarTech.com Manualer
22 September 2025
14 September 2025
14 September 2025
13 September 2025
5 August 2025
5 August 2025
22 Januar 2025
22 Januar 2025
21 Januar 2025
21 Januar 2025
Bryter Manualer
- Muller
- Toolcraft
- Jung
- Cambium Networks
- Apc
- Manhattan
- Monacor
- Vimar
- D-Link
- InLine
- Smart-AVI
- HELGI
- Lancom
- Robbe
- Hamlet
Nyeste Bryter Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025