TP Link Festa FS328GP Bruksanvisning
Les nedenfor 📖 manual på norsk for TP Link Festa FS328GP (16 sider) i kategorien Bryter. Denne guiden var nyttig for 27 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 14 brukere
Side 1/16
Festa Smart Switch
LED Explanation
LED
Explanation
PWR On/O: Power on/o
SYS
On (Green): Running at 1000 Mbps
On (Yellow): Running at 10/100 Mbps
Blinking: Transmitting/receiving data
O: No connected device
PoE Status
(For Port 1-4 of Festa FS308GP
/Port 1-8 of Festa FS310GP)
On: Providing PoE power
Blinking: Current-overload/Short-circuit/Connected to a
non-standard PD/Power exceeded the user-dened value
O: Not providing PoE Power
PoE Max
(For Festa FS308GP/
Festa FS310GP)
On: Remaining power supply ≤ 7 W
Blinking: Remaining power supply keeps ≤ 7 W for more than
2 minuites
O: Remaining power supply keeps ＞ 7 W
Blinking: System running normally
On/O: System running abnormally
Speed
SFP1/SFP2
(For Festa FS310GP only)
Green/Yellow On: Running at 1000/100 Mbps
Blinking: Transmitting/receiving data
O: No connected device
For simplicity, we will take Festa FS310GP for example throughout the Guide.
For simplicity, we will take Festa FS308G for example throughout the Guide.
Note:
1. The PoE ports can also connect to non-PoE devices, but only transmit data.
2. The PoE ports shall not be used to charge lithium batteries or devices supplied
by lithium batteries.
3. Maximum PoE power is 30 W for each PoE port, and total PoE budget is 62 W
(for Festa FS308GP) / 61 W (for Festa FS310GP) respectively.
4. PoE budget calculations are based on laboratory testing. Actual PoE power
budget is not guaranteed and will vary as a result of client limitations and
environmental factors.
Note:
1. Port 8 is a PD (Powered Device) port. When powered through port 8, the
switch can only be powered by power supplies that comply with the 802.3af/at
standard and Power Source Class 2 (PS2) or Limited Power Source (LPS)
defined in the standard of IEC 62368-1.
2. The DC power input takes precedence over the PD port. If the DC input fails,
the PoE input on the PD port willl supply power instead.
Connection for Non-PoE Switch
Connection for PoE Switch
DC Power Adapter
AC Power Cord
PoE+ Ports (1-8)
SFP Slots
Router/Gateway
LAN Port
WAN Port
Internet
IP Camera AP IP Phone
Powered Device (PD)
PC
PC
Router/Gateway
LAN Port
WAN Port
Internet
©2024 TP-Link
7106511327 REV1.1.0
Installation
Note: For simplicity, we will take Festa FS310GP for example.
Desktop:
Attach the supplied feet to the bottom of the switch to prevent it from
slipping when placed on a desktop.
Note:
For detailed information, please refer to
the Wall Mounting Guide on the device’s
support page.
Wall-mounting:
Drill two holes on the wall according to the mounting holes on the
bottom of the switch, then secure the switch to the wall with two
suitable screws (not provided).
Produkspesifikasjoner
| Merke: | TP Link |
| Kategori: | Bryter |
| Modell: | Festa FS328GP |
Trenger du hjelp?
Hvis du trenger hjelp med TP Link Festa FS328GP still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter TP Link Manualer
3 August 2025
3 August 2025
3 August 2025
3 August 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
3 Januar 2025
10 Desember 2024
Bryter Manualer
- Gewiss
- Panasonic
- Juniper
- CyberPower
- Biltema
- Smart-AVI
- Apc
- H-Tronic
- Cisco
- Inverto
- Atlona
- Alfatron
- INOGENI
- DataVideo
- Hager
Nyeste Bryter Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025