Tripp Lite B300-9X2-4K Bruksanvisning

Tripp Lite Hi-fi system B300-9X2-4K

Les nedenfor 📖 manual på norsk for Tripp Lite B300-9X2-4K (51 sider) i kategorien Hi-fi system. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/51

Owner’s Manual

9 x 2 Multi-Format

4K Presentation

Matrix Switch

Model: B300-9X2-4K

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Español 18 • Français 35

Important Safety Instructions

BATTERY SAFETY NOTICE

There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used Batteries

according to the relevant instructions.

WARNING

Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly

wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on

accessible metal parts.

62368-1 Clause Equipment for Installation:

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National Electrical Code

and NFPA 75.

• Read all of these instructions. Save them for future reference.

• Follow all warnings and instructions marked on the device.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause

the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not

use this equipment in the presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

• This device is designed for IT power distribution systems with up to 230V phase-to-phase voltage.

• Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.

• Do not use the device near water.

• Do not place the device near, or over, radiators or heat registers.

• The device cabinet is provided with slots and openings to permit adequate ventilation. To ensure reliable operation and

protect against overheating, these openings must never be blocked or covered.

• The device should not be placed on a soft surface (bed, sofa, rug, etc.), as this will block its ventilation openings. Likewise,

the device should not be placed in a built-in enclosure unless adequate ventilation has been provided.

• Never spill liquid of any kind on the device.

• Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

• The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type

of power available, consult your dealer or local power company.

• To prevent damage to your installation, ensure that all devices are properly grounded.

• The device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable to insert the plug into

the outlet, contact your electrician to replace your obsolete outlet. Do not attempt to defeat the purpose of the grounding-

type plug. Always follow your local/national wiring codes.

• Position system cables and power cables carefully to ensure that nothing rests on any cable. Route the power cord and

cables so that they cannot be stepped on or tripped over.

• If an extension cord is used with this device, make sure that the total ampere rating of all products used on the cord does

not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not

exceed 15 amperes.

• To help protect your system from sudden transient increases and decreases in electrical power, it is recommended that you

plug your devices into a Tripp Lite surge protector, line conditioner, or uninterruptible power supply (UPS).

Important Safety Instructions

• When connecting or disconnecting power to hot-pluggable power supplies, observe the following precautions:

> Install the power supply before connecting the power cable to the power supply

> Unplug the power cable before removing the power supply

> If the system has multiple sources of power, disconnect power from the system by unplugging all power cables from the

power supplies

> Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out

parts, resulting in a risk of ﬁre or electrical shock

> Do not attempt to service the device yourself. Refer all servicing to qualiﬁed service personnel

• If the following conditions occur, unplug the device from the wall outlet and bring it to qualiﬁed service personnel for repair:

> The power cord or plug has become damaged or frayed

> Liquid has been spilled into the device

> The device has been exposed to rain or water

> The device has been dropped or the cabinet has been damaged

> The device exhibits a distinct change in performance, indicating a need for service

> The device does not operate normally when the operating instructions are followed

• Adjust only those controls that are covered in the operating instructions. Improper adjustment of other controls may result in

damage that will require extensive repair work by a qualiﬁed technician.

Rack Mounting Safety Instructions

• Before working on the rack, make sure that the stabilizers are secured on the rack, extended to the ﬂoor, and that the full

weight of the rack rests on the ﬂoor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple

racks before working on the racks.

• Always load the rack from the bottom up, and load the heaviest item in the rack ﬁrst.

• Make sure that the rack is level and stable before extending a device from the rack.

• Use caution when pressing the device rail release latches and sliding a device into or out of a rack; the slide rails can pinch

your ﬁngers.

•

After a device is inserted into the rack, carefully extend the rail into a locking position, and then slide the device into the rack.

• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80

percent of the branch circuit rating.

• Make sure that all equipment used on the rack, including power strips and other electrical connectors, is properly grounded.

• Ensure that proper airﬂow is provided for devices in the rack.

• Ensure that the operating ambient temperature of the rack environment does not exceed the maximum ambient

temperature speciﬁed for the equipment by the manufacturer.

• Do not step on or stand on any device when servicing other devices in a rack.

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	Hi-fi system
Modell:	B300-9X2-4K
Produkttype:	Matrisevelger for mediapresentasjon
Innebygd skjerm:	Nei
Vekt:	2360 g
Bredde:	432.3 mm
Dybde:	154.1 mm
Høyde:	43.9 mm
LED-indikatorer:	Ja
Bruksanvisning:	Ja
USB-kontakttype:	USB Type-A, USB Type-B
Maksimal oppløsning:	4096 x 2160 piksler
Opprinnelsesland:	Taiwan
Pakkevekt:	3200 g
Strømforbruk (maks.):	- W
Hodetelefonutganger:	2
Sertifisering:	FCC
HDCP:	Ja
3D:	Ja
Antall HDMI-inngangsporter:	3
DisplayPorts inn:	1
HDCP-versjon:	1.4
AC-inngangsspenning:	100 - 240 V
AC-inngangsfrekvens:	50 - 60 Hz
Støttede lydformater:	PCM
Antall USB-porter:	6
Pakkedybde:	540 mm
Pakkehøyde:	232.9 mm
Pakkebredde:	116.1 mm
Hodetelefontilkobling:	3,5 mm
Kontrolltype:	Knapper
Kabler inkludert:	AC
Pakketype:	Boks
Driftstemperatur (T-T):	0 - 40 °C
Oppbevaringstemperaturomåde (Celsius):	-20 - 60 °C
Bærekraftsertifikater:	REACH, RoHS
Fjernkontroll medfølger:	Ja
Komponentvideo (YPbPr/YCbCr) ut:	1
Kroppsmateriale:	Stål
Av/på-bryter:	Ja
Rack-kapasitet:	1U
Støttede oppløsninger:	4096 x 2160, 1920 x 1200
Relativ luftfuktighet under drift (H-H):	0 - 80
Rack-montering:	Ja
Inngangsporter for VGA (D-Sub):	2
Komposittvideo inn/sammensatt video inn:	1
Dekselfarge:	Sort
Masterkassens (ytterkassens) GTIN (EAN/UPC):	10037332251265
Masterkassens (ytterkassens) bruttovekt:	9600 g
Masterkassens (ytterkassens) lengde:	564.9 mm
Produkter per masterkasse (ytterkasse):	3 stykker
Masterkassens (ytterkassens) bredde:	374.9 mm
Masterkassens (ytterkassens) høyde:	258.1 mm
Innput-strøm:	1 A
Gummibein:	Ja
Audio RCA-inngang:	2
Maksimum oppløsning (HDMI):	4096 x 2160 piksler
Extended display identification data (EDID):	Ja
Lyd-kanaler:	2.1
Maksimum opløsning (VGA):	1920 x 1200 piksler
Støttet chroma undersampling:	4:4:4, 4:2:0