Vollrath CADJ-3 Bruksanvisning
Vollrath
Ikke kategorisert
CADJ-3
Les nedenfor 📖 manual på norsk for Vollrath CADJ-3 (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 1.5 brukere
Side 1/12
Installation Instructions
©
2017 The Vollrath Company L.L.C. Part No. 350719-1 ml 3/30/17
Spring Loaded In-Counter Cup Dispenser
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
TOOLS YOU WILL NEED
• #2 Phillips Screwdriver
• Drill
• ¹⁄₈" Drill Bit (For #29 Pilot Hole)
• Sabre Saw or Hand Router
• 3 #8 x 1.00" Pan Head Phillips Screws (included)
CHOOSE THE CORRECT SPRING
The dispenser includes two springs for different applications. See the
chart below. The lighter weight dispenser is factory installed. See
“Change Default Spring (Optional)” on page 3.
INSTALLATION
Mount the Dispenser
1. Cut the appropriate diameter opening in the mounting surface.
2. Lift the bezel to remove it from the tube to revel the mounting holes
and the components that can be adjusted to accommodate different
cup diameters.
WARNING
CAUTION
Mounting Dispensing Use This Spring
Vertical
Paper or Plastic Heavier Weight
Foam Lighter Weight
Horizontal Paper, Plastic or Foam Lighter Weight
Angled
Paper or Plastic Heavier Weight
Foam Lighter Weight
Item No. For Cup Rim Diameter Cutout Diameter
CADJ-1 2¹⁄₂ –3¹⁄₂" (6.4 – 8.9 cm) 4 (10.2)
CADJ-2 3 – 3⁷⁄₈"(7.6 – 9.8 cm) 4¹⁄₂ (11.4)
CADJ-3 3 – 4⁵⁄₈" (7.6 – 11.7 cm) 5¹⁄₄ (13.3)
CADJ-4 4¹⁄₂ –5¹⁄₄" (11.4 – 13.3 cm) 5³⁄₄ (14.6)
2 Spring Loaded In-Counter Cup Dispenser Operator’s Manual
3. Rotate the adjustment ring to reveal the mounting holes.
4. Place the tube into the cut mounting hole. Mark the mounting hole
locations.
5. Remove the dispenser from the mounting hole.
6. Pre-drill pilot the pilot holes. Vollrath suggests a ¹⁄₈" (0.125)
diameter pilot hole diameter of ¹⁄₈" (0.125).
7. Insert the dispenser into the cutout hole and align the mounting
holes to the pre-drilled holes.
8. Insert the included screws into the mounting holes. Tighten snuggly.
ADJUST DIAMETER TO FIT CUPS
1. Loosen, but do not remove adjusting ring screws.
2. Rotate the adjusting ring to widen the opening.
3. Insert a short stack of cups into the dispenser.
4. Rotate the adjusting ring until the cups are held in place.
Mounting
hole
Mounting
hole
Mounting hole
Adjusting
Ring Screw
Adjusting
Ring Screw
Adjusting Ring Screw
Produkspesifikasjoner
| Merke: | Vollrath |
| Kategori: | Ikke kategorisert |
| Modell: | CADJ-3 |
Trenger du hjelp?
Hvis du trenger hjelp med Vollrath CADJ-3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Vollrath Manualer
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
Ikke kategorisert Manualer
- Polyend
- Tele Vue
- BZBGear
- Atosa
- Steinberg
- Moultrie
- Ideal
- Cadco
- Remington
- Ledlenser
- Karma
- Pengo
- Chipolino
- Dahua Technology
- Be Cool
Nyeste Ikke kategorisert Manualer
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025