Arecont Vision MegaVideo AV3115DN Bruksanvisning

Arecont Vision Sikkerhetskamera MegaVideo AV3115DN

Les nedenfor 📖 manual på norsk for Arecont Vision MegaVideo AV3115DN (18 sider) i kategorien Sikkerhetskamera. Denne guiden var nyttig for 22 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/18
Arecont Vision D4SO Outdoor Dome Series Installation Manual
0 | P a g e
Arecont Vision D4SO Outdoor Dome Series Installation Manual
1 | P a g e
D4SO Outdoor Dome Installation Manual
Inside the box:
A. Arecont Vision D4SO Dome Camera
B. Mounting template
C. Security L-key
D. One double sided hex key
E. One single sided hex key
F. 6-position external power & IO plug
G. Pack of four (4) wood screws and four (4)
dry wall anchors
Not included but needed:
#1 Phillips head screw driver
#2 Phillips head screw driver
Small Flat Head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting Template, prepare
the mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
D4SO, align accordingly. If using the
side conduit hole, please see step 7
below.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
Image 2
G
F
E
C
RJ-5
POWER
HOLE
A
D
B
Arecont Vision D4SO Outdoor Dome Series Installation Manual
2 | P a g e
4. Run Ethernet cable through the hole on the
bottom of D4SO and plug it into the RJ45 port
on Arecont Vision’s compact MegaVideo
®
camera. (Image 3) . NOTE: If the camera will
be powered via PoE, please skip to step 5.
Image 3
5. If the camera is powered by an outside power
supply, run power wires through the hole and
connect power wires to appropriate contacts
of 6-postion connector using small flat screw
driver and connect 6-position plug to camera
as shown in Image 4-1.
Note: Please make sure the polarity of the
AC/DC input on the camera match the way
wires are installed in connector shown in
Image 4-2.
Image 4-1
Image 4-2
6. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any optional
hardware suitable for the mounting surface.
Arecont Vision D4SO Outdoor Dome Series Installation Manual
4 | P a g e
Adjusting the Focus:
11. To focus the lens, loosen the three set screws
as shown in Image 9 and adjust each as
needed. A adjusts the zoom, B adjusts the
iris, C adjusts the focus.
Note: Adjust zoom first then focus!
Note: For more information on proper
focusing technique, please watch the
“Focusing Arecont Vision Megapixel
Cameras” Best Practices Training Video at
www.youtube.com/ArecontVision.
12. Secure the dome cover to the camera.
13. Tighten the set screw on the dome cover.
14. Rotate bubble to align camera with slot in
camera shield.
15. Remove the protective film from the camera
dome. NOTE: be cautious not to scratch the
vandal dome cover.
Image 9
B
A
C
Arecont Vision D4SO Outdoor Dome Series Installation Manual
5 | P a g e
D4SO Pendant Mount (MD-CMT) Installation Instructions
Inside the box:
A. Top shield
B. Pendant Mount
C. Mounting template
D. Pack of four (4) machine screws
E. Pack of four (4) small machine screws
F. Pack of four (4) wood screws and four (4)
dry wall anchors
G. Large round rubber gasket
H. Smaller square rubber gasket
I. One double sided hex key
Not included but needed:
#2 Phillips head screw driver
Image 10
1. Remove Pendant Mount and hardware from
the box.
Image 11 Image 12
2. Using the Mounting template, prepare the
mounting provisions for camera installation.
3. Place small gasket onto pendant dome as
shown in image 11.
4. Attach Dome to Pendant as shown in Image
12 using four machine screws provided.
5. Install large round rubber gasket onto
Pendant as shown in image 12. Be sure to
align the holes appropriately.
6. Run Ethernet Cable and outside power cable
(if necessary) through the Pendant.
7. Attach Pendant to the ceiling using the four
wood screws provided or any optional
hardware suitable for the mounting surface.
8. For installation of the camera, please
reference “Mounting the Camera”.
E
C
H
G
D
B
A
I
F
Arecont Vision D4SO Outdoor Dome Series Installation Manual
6 | P a g e
D4SO Wall Mount (MD-WMT2) Installation Instructions
Caution:
MD-WMT2 only fits with SV-JBA and SV-EBA but
not with MD-JBA and MD-EBA!
Inside the box:
A. Wall mount ( Fit 1.5 NPT Standard)
B. Top shield
C. Mounting template
D. One double sided hex key
E. Pack of four (4) machine screws
F. Pack of four (4) wood screws and four (4)
dry wall anchors
Not included but needed:
#2 Phillips head screw driver
Image 13
1. Remove Wall Mount and hardware from the
box.
Image 14
2. Using the Mounting template, prepare the
mounting surface.
3. Install Top Shield on Wall Mount as shown in
image 14.
4. Fasten the socket set screw using double side
hex key.
5. Run Ethernet Cable and outside power cable
(if necessary) through the Wall Mount.
6. Attach Wall Mount to the wall using drywall
screws or any optional hardware suitable for
the mounting surface.
7. For installation of the camera, please
reference “Mounting the Camera”.
B
E
D
C
A
F
Arecont Vision D4SO Outdoor Dome Series Installation Manual
12 | P a g e
D4SO Electrical Box Adapter (SV-EBA) for SV-WMT2 Installation Instructions
Caution:
SV-EBA fits with MD-WMT2 but not with D4SO and
MD-CMT!
Inside the box:
A. Electrical Box Adapter
B. Pack of four (4) machine screws
Not included but needed:
#2 Phillips head screw driver
Common Electrical Box, such as single
gang box, double gang box or square
electrical box.
Image 28
1. Remove Electrical Box Adapter and hardware
from the box.
2. Match mounting holes on adapter with thread
holes on the electrical box, make sure every
threaded hole is matched with mounting hole.
3. Attach Electrical Box Adapter to Electrical Box.
4. Attach Dome to Electrical Box Adapter as
shown in Image 29. Please reference
Mounting the Camera”, if needed.
Image 29
B
A

Produkspesifikasjoner

Merke: Arecont Vision
Kategori: Sikkerhetskamera
Modell: MegaVideo AV3115DN

Trenger du hjelp?

Hvis du trenger hjelp med Arecont Vision MegaVideo AV3115DN still et spørsmål nedenfor, og andre brukere vil svare deg




Sikkerhetskamera Arecont Vision Manualer

Sikkerhetskamera Manualer

Nyeste Sikkerhetskamera Manualer

M-e

M-e WAF-4 Bruksanvisning

7 September 2025
M-e

M-e DG 95 Bruksanvisning

7 September 2025
M-e

M-e FS-2.1 Bruksanvisning

6 September 2025
M-e

M-e FS-1 Bruksanvisning

6 September 2025
M-e

M-e SAM-1000 Bruksanvisning

6 September 2025
M-e

M-e FLS-100 Bruksanvisning

6 September 2025
M-e

M-e DG 94 Bruksanvisning

6 September 2025
M-e

M-e DGF-100 Bruksanvisning

6 September 2025
Belkin

Belkin NetCam Bruksanvisning

6 September 2025