Atoll DAC200 Bruksanvisning

Atoll Mottaker DAC200

Les nedenfor 📖 manual på norsk for Atoll DAC200 (8 sider) i kategorien Mottaker. Denne guiden var nyttig for 18 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/8
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CONVERTER DAC200 Sig
ATOLL ELECTRONIQUEPage 5Page 4
1) XLR output (Right).
2) Analog output (Right).
3) Analog output (Left).
4) XLR output (Left).
5) Digital output (coaxial).
6) Digital output (optical).
9) Digital input 1 (optical).
10) Digital input 3 (coaxial).
11) Digital input 2 (coaxial).
12) Digital input 1 (coaxial).
13) AES input.
14) USB input (type B).
15) Power plug.
16) Switch ON/OFF.
CONNECTING REMOTE CONTROL
DETAILS OF FUNCTIONS
Reminder: do not make any connections when your device is turned on.
17) Sources selection keys.
18) Filters setup keys (see details beside): selection is made with keys (17).
19) Headphones output (jack 3,5mm) (linking the headphones shut down
the Output signals).
NB : When you connect a headphones, regardless of the BY-PASS
mode, you’ll switch to volume management mode (BY-PASS OFF) in
order to manage the volume level of the headphones.
20) Display: selected source shows on the left and frequency sampling on
the right. When no signal is detected display shows UNLOCK.
21) Volume control keys &
+
(when BY-PASS OFF) from 0 to 80
22) ON/stand-by key.
The remote control is equipped with 2 Lithium CR2025 batteries. This remote control
is also able to drive all others ATOLL’s products: CD players; Tuner; Integrated or
Preamplifier. (See those manuals for details).
23) Volume keys
+
&
(*)
.
24) Standby/ON key.
25) Source selection keys
+
& .
23
24
25
(*)
Volume control is possible only when BY-PASS OFF. When changing the volume, level
is displayed shortly, then the display shows the sampling frequency.
BLUETOOTH®
FILTERS SETUP
Your appliance allows the reception of audio signals sent since any devices having a
Bluetooth transmitter (Smartphone, tab, computer…).
First time association:
• Activate the Bluetooth® connectivity of your emitter device.
• Select the Bluetooth® (BT) input of DAC200 Sig: unlock symbol
BT
appears.
• Select your appliance on the list of possible receiver (named DAC200 Sig).
• Once the connection is made, the lock symbol
BT
appears.
The whole audio signals of your device source will then be transmitted towards your
DAC200 Sig. Your emitter device will remain associated until you unlock the DAC200
Sig with your Smartphone or switch off your amplifier.
Association of another emitter:
• To connect another emitter, you’ll need to disconnect the first emitter. The quality
of reception of the signal depends on the power of the Bluetooth emitter and
the distance between the 2 devices.
Avoid being more than 5 meters of your DAC200 Sig for a correct reception without
any risks of signal cuts.
While pressing key (18) you can choose different kinds of digital filters which you can select
with the 17’s keys:
• Standard: fast roll-off, minimum phase filter
• Fast lin: fast roll-off, linear phase filter
• Slow min: soft roll-off, minimum phase filter
• Slow lin: soft roll-off, linear phase filter
• Apodizing: fast roll-off by apodizing and linear phase filter
• Hybrid: fast roll-off and minimum phase filter
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19
20 21 22
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CONVERTER DAC200 Sig
ATOLL ELECTRONIQUEPage 3Page 6
CAUTIONS
• Do not make any connections when your device is powered on.
• Put your device in a dry and well ventilated place, far from a source of heat.
• Do not put something on your converter.
• Do not make any plug-in when the converter is on.
• Avoid any short-cut.
ADVISES
• To optimize the performance of your device, you should switch it on at least
half an hour before any listening, the time for the power stage to reach its ideal
working temperature.
• Your device will give you optimal listening quality after this time-lapse.
• Between two uses, it is, therefore, preferable to let the device in the standby
position so that it remains at its optimum temperature.
• At night or when you leave your home, it is best to use the main switch to turn
off the device.
• To optimize the sound quality of your system, we recommend that you choose
good-quality connection cords. Do not hesitate to ask your specialist dealer for
advice.
• To avoid any parasite sounds coming from some softwares, we recommend
you to unplugged the USB cable from your computer when not using it.
E.C. marking certified the conformity with low tension directive 73/23/CEE, directive
CEM 89/336/CEE and national transpositions.
E.C. MARKING
The guarantee is period from date of purchase. We recommend you to ask two years
your dealer to fill the guarantee and to conserve it. The guarantee is only available
for appliance which have been use correctly.
GUARANTEE
Your appliance is equipped with a High-Res. asynchronous USB Input (B type). It will
be possible to use it only when you’ll have downloaded the appropriate driver on your
computer. This driver can be freely downloaded on our website at the page:
You will find attached an explanatory guide on how to install
this driver.
This driver is not required for Macintosh computers.
To avoid any troubles in the transfer of High Resolution files
(DSD & 24 bits/192 kHz), it is recommended to use a USB
interconnect with ferrite.
USB INPUT
ACCEPTED FORMATS
• Accepted format on optical and coaxial Inputs: 16-24 bits (44,1 kHz, 48 kHz, 88,2 kHz,
96 kHz, 176,4 kHz and 192 kHz).
• Accepted format on USB Input:
– DSD: DSD64, DSD128, DSD256 and DSD512.
– PCM: 16-32 bits (44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz,
352,8 kHz, 384 kHz, 705,6 kHz and 768 kHz).
This DAC can be used as:
• Single converter as a source linked to a LINE or XLR input of an integrated or
preamp which will setup the volume control. In that case you’ll need to fix the output
level of the DAC200 Sig and put it on BY-PASS position.
• Both converter and preamp directly linked to a power amplifier: volume control
is then made by the DAC200 Sig. In this configuration, you need to place
configuration as BY-PASS OFF.
Put the DAC200 Sig on stand-by then press together keys (21) about 3 seconds.
Position ON/OFF changes on every press of the knob.
• Display BY-PASS means that the volume control is not activated.
• Display BY-PASS OFF means that the volume control is activated.
BY-PASS MODE
Note : BY-PASS mode is recommended when you’re using an integrated. If you are using
the DAC200 Sig as a preamp, check if the amplifier is able to support a maximum input
level of 5 Vrms.
https://www.atoll-electronique.com/en/xmos-specific-driver-usb/
ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ CONVERTER DAC200 Sig
ATOLL ELECTRONIQUEPage 7Page 2
You have just bought a Digital/Analog converter DAC200 Signature,
with exceptional audiophile performances. We really thank you for your
confidence in our products. To get the best part of this product, please read
carefully this manual.
YOU WILL FIND
ENCLOSED
– A converter DAC200 Signature.
– A powerlead.
– An RCA wire.
– This manual with the certificate of guarantee.
TECHNICAL DATA
Supply:
Total of capacitors:
Frequency response:
Converter:
Dynamic:
THD at 1 kHz (0 dBF):
Signa/noise ratio:
Switch OFF consumption:
Standby power consumption (preheating):
ON consumption:
Maximum output level:
Dimensions:
Weight:
2 4,6 + 10 VA×
20 030 µF
5 Hz - 20 kHz
ES9028PRO
133 dB
- 120 dB
129 dB
0 W
9 W
13 W
2,25 Vrms
440 293 63 mm× ×
5 Kg
(Data subject to change)
ATOLL ELECTRONIQUE®
is a French Company that designs, manufactures,
and commercializes all its products.

Produkspesifikasjoner

Merke: Atoll
Kategori: Mottaker
Modell: DAC200

Trenger du hjelp?

Hvis du trenger hjelp med Atoll DAC200 still et spørsmål nedenfor, og andre brukere vil svare deg


Mottaker Atoll Manualer

Atoll

Atoll IN50 Bruksanvisning

19 Desember 2024
Atoll

Atoll AM200 Bruksanvisning

19 Desember 2024
Atoll

Atoll DAC200 Bruksanvisning

19 Desember 2024
Atoll

Atoll AM 00 Bruksanvisning

19 Desember 2024
Atoll

Atoll IN80 Bruksanvisning

19 Desember 2024
Atoll

Atoll IN200 Bruksanvisning

19 Desember 2024
Atoll

Atoll IN100 Bruksanvisning

19 Desember 2024

Mottaker Manualer

Nyeste Mottaker Manualer

Yamaha

Yamaha Aventage RX-A4A Bruksanvisning

9 April 2025
Yamaha

Yamaha Aventage RX-A8A Bruksanvisning

9 April 2025
Phonocar

Phonocar PH544 Bruksanvisning

6 April 2025
DJI

DJI D-RTK 3 Bruksanvisning

5 April 2025
QSC

QSC SPA-Qf 60x2 Bruksanvisning

2 April 2025
Harper

Harper HDT2-5010 Bruksanvisning

2 April 2025
Harper

Harper HDT2-2010 Bruksanvisning

2 April 2025
Streacom

Streacom TL1 Bruksanvisning

31 Mars 2025
Graupner

Graupner GR-8 Bruksanvisning

31 Mars 2025
MB Quart

MB Quart FA2-1000.1 Bruksanvisning

30 Mars 2025