Furman D10-PFP Bruksanvisning

Furman grenuttak D10-PFP

Les nedenfor 📖 manual på norsk for Furman D10-PFP (1 sider) i kategorien grenuttak. Denne guiden var nyttig for 5 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 3 brukere

Last ned PDF

Side 1/1

D10-PFP INSTRUCTIONS

INS02805 REV A 02/08

The D10-PFP is a sturdy, rack-mountable power distributor featuring ten circuit breaker protected rear

panel outlets. Install a D10-PFP in your rig or component rack to safely power all of your equipment.

Note that the D10-PFP is a power distributor only, and offers no conditioning or surge protection

functions, making it an ideal extension to an existing branch circuit.

MAXIMUM LOAD:

The ten circuit breaker protected outlets are rated at 15 Amps, which is equivalent to 1800 Watts at 120

Volts. If the total load on the D10-PFP (combining all outlets) exceeds 15 Amps, the circuit breaker

(located on the front panel) will trip, cutting off power to all connected equipment. Should this happen,

reduce the load by unplugging one or more units from the D10-PFP, then push the circuit breaker

button in to reset it.

CAUTION:

Only for use with 15 Amp circuits utilizing a minimum of 14 AWG.

15 AMP

POWER ON

D10-PFP POWER DISTRIBUTOR

Produkspesifikasjoner

Merke:	Furman
Kategori:	grenuttak
Modell:	D10-PFP
Vekt:	2300 g
Kabellengde:	1.8 m
Produktfarge:	Sort
Kroppsmateriale:	Stål
Rack-kapasitet:	1U
Maksimal styrke:	1800 W
Antall AC outlets:	10 AC-utganger
Strøm (maks.):	15 A
Nominell innputspenning:	90-140 V
Nominell outputspenning:	120 V