Kidde KI-PD Bruksanvisning

Kidde Røykvarsler KI-PD

Les nedenfor 📖 manual på norsk for Kidde KI-PD (4 sider) i kategorien Røykvarsler. Denne guiden var nyttig for 4 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 2.5 brukere

Last ned PDF

Side 1/4

04-08-18

Page 1 of 4 DATA SHEET K85001-0646

Not to be used for installation purposes. Issue 1

KIDDE

Catalog  Intelligent Initiating Devices

Technology that saves lives

Intelligent Smoke

Detector

KI-PD

Overview

The KI-PD optical smoke detector brings advanced sensing

technology to a practical design that increases efﬁciency, saves

installation time, cuts costs, and extends life safety and property

protection capabilities. Continuous self-diagnostics ensure reli-

ability over the long-haul, while environmental compensation helps

reduce maintenance costs.

Like all KI Series detectors, the KI-PD is an intelligent device that

gathers analog information from its optical sensor, converting this

data into digital signals. To make an alarm decision, the detector’s

on-board microprocessor measures and analyzes sensor read-

ings and compares this information to historical data. Digital ﬁlters

remove signal patterns that are not typical of ﬁres, thus virtually

eliminating unwanted alarms.

Standard Features

Note: Some features described here may not be supported by

all control systems. Check your control panel’s Installation and

Operation Guide for details.

• Next generation optical smoke sensing technology

• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration

• Uses Existing Wiring

• Automatic Device Mapping

• Up To 250 Total Addresses Per Loop

• Two Levels of Environmental Compensation

• Two Levels of Dirty Detector Warning

• Twenty Pre-Alarm Settings

• Five Sensitivity Settings

• Non-Volatile Memory

• Electronic Addressing

• Identiﬁcation of Dirty or Defective Detectors

• Automatic Day/Night Sensitivity Adjustment

• Bicolor (Green/Red) Status Led

• Standard, Relay, Fault Isolator, and Audible Mounting Bases

• Sensor Markings Provide Easy Testing Identiﬁcation

S853

Compatible with VS & VM control systemsCompatible with VS & VM control systems

Produkspesifikasjoner

Merke:	Kidde
Kategori:	Røykvarsler
Modell:	KI-PD
Strømkilde:	AC
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Antall per pakke:	1 stykker
Maksimal rekkevidde:	12.35 m
Beste bruk:	Home, Office
Detektortype:	Karbonmonoksid detektor
Produktfarge:	Hvit
Pakketype:	Boks
Driftstemperatur (T-T):	0 - 49 °C
Oppbevaringstemperaturomåde (Celsius):	-20 - 60 °C
Kroppsmateriale:	Plast
Relativ luftfuktighet under drift (H-H):	0 - 93
Støttede plasseringer/plasseringer som kan benyttes:	Horisontal
Montasjetype:	Flate-montert
Enkel installering:	Ja
Trådløse forbindelser:	Ja
Interconnectable:	Ja