Klein Tools ET300AU Bruksanvisning
Klein Tools
måleinstrument
ET300AU
Les nedenfor 📖 manual på norsk for Klein Tools ET300AU (1 sider) i kategorien måleinstrument. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/1
CUSTOMER SERVICE
KLEIN TOOLS
25 Aldershot Road
Lonsdale, SA 5160
1300 55 77 77
www.kleintoolsaustralia.com
139781 Rev. 01/15 D
Instruction Manual
• FULLY AUTOMATIC
• FLASHING ARROW
INDICATOR FOR
EASY IDENTIFICATION
• 90 – 280V AC
OPERATION
• MICROPROCESSOR
CONTROLLED FOR
MORE ACCURATE
READINGS
Apo
Digital Circuit
Breaker Finder
5291
ET300AU
ENGLISH
ET300AU
PATENT NO. 6,222,358
90-280VAC
25W
Digital Circuit Breaker
Finder
ET300AU
SCAN
RECEIVER
Micro-Processor
Controlled
ET300AU
Instruction Manual
GENERAL SPECIFICATIONS
•Operating Voltage: 90 – 280V AC, 25W
•Operating Frequency: 50 – 60Hz
• Tracking Distance: Up to 305 m (1,000 ft.)
•Operating Temperature: 0°C to 40°C (32°F to 104°F)
•Relative Humidity: 50%
•Altitude: < 2,000 m (6,562 ft.)
• Environment: For indoor use only
•Power: 9 volt alkaline battery
•Auto Power Off: Approximately 4 minutes
•Transmitter Dimensions: 71 x 48 x 30 mm (3" x 2" x 1")
•Receiver Dimensions: 152 x 51 x 23 mm (6" x 2" x 1")
•Transmitter Weight: 45 g (1.6 oz.)
•Receiver Weight: 91 g (3.2 oz.)
•Sensitivity:
Indication at 4 mm (0.16") distance from a wire carrying 250V AC.
•Safety Rating: AUSTRALIA RCM 5291 (Regulatory Compliance Mark)
•Insulation: Double
SAFETY PRECAUTIONS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
•Understandtherisksofworkingaroundlivevoltage.
•Turnoffpowerbeforeinspecting,applying,orremoving
the transmitter.
•Exerciseextremecautionaroundlive,barewires,especially
in an open breaker panel.
•Consultwithanexperiencedelectricianwhennecessary.
INSTRUCTIONS
1. Identify the wall outlet or fixture for which the breaker must be
determined.
2. Safely check that the outlet or fixture is live.
3.Pluginthetransmitter.ItsLEDwilllightifitisreceivingpower
(see illustration 1).
4. Move to the breaker panel with the receiver.
5. Turn on the receiver by pressing, but not holding, the power button.
YouwillhearabeepandseeitsLEDlit(seeillustration2).
6. Position the receiver to the breakers in the panel perpendicular
to be scanned (see illustrations 3 & 4).
7. Slowly scan all breakers in the panel once by moving the receiver
side to side along the breaker panel (see illustrations 3 & 4). Ignore
any beeps or indications, as the receiver is learning the panel.
8. Scan all breakers a second time. This time, the receiver will beep
and illuminate the green arrow only at the correct breaker.
9. Power off the receiver by pressing and holding the power button
Return to the outlet or fixture and remove the transmitter.
1
Once plugged in, the LED
will light up when
socket is live
ET300AU
PATENT NO. 6,222,358
90-280VAC
25W
2
LED will light up
When you press
down on the
Power Button
Digital Circuit Breaker
Finder
ET300AU
SCAN
ocessor
ed
3
4
WARRANTY
www.kleintools.com/warranty
CLEANING
Clean the instrument by using a damp cloth. Do not use abrasive cleaners
or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage in
extreme conditions exceeding the limits mentioned in the Specifications section,
allow the instrument to return to normal operating conditions before using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must
be properly disposed of in accordance with local regulations.
Produkspesifikasjoner
| Merke: | Klein Tools |
| Kategori: | måleinstrument |
| Modell: | ET300AU |
Trenger du hjelp?
Hvis du trenger hjelp med Klein Tools ET300AU still et spørsmål nedenfor, og andre brukere vil svare deg
måleinstrument Klein Tools Manualer
3 August 2025
3 August 2025
3 August 2025
3 August 2025
3 August 2025
3 August 2025
måleinstrument Manualer
Nyeste måleinstrument Manualer
3 August 2025
3 August 2025
3 August 2025
2 August 2025
2 August 2025
2 August 2025
2 August 2025