Lowell ACS-2020-IG-10C-HW Bruksanvisning

Lowell Ikke kategorisert ACS-2020-IG-10C-HW

Les nedenfor 📖 manual på norsk for Lowell ACS-2020-IG-10C-HW (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 26 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 13.5 brukere

Side 1/3
INTERNAL USE ONLY: PN 24232
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 1834
Model ACS-2020-IG-10C-HW | Rev. 12.20.23 | pg. 1/3
POWER RATING: 120VAC, 60Hz, 20A (each circuit)
CHASSIS: 60x 2” x 2” steel chassis with black powder epoxy finish
TERMINATION: Hardwired 6 ft. non-metallic flexible conduit (whip) rotates in any direction.
It can be trimmed in the field if needed.
tacles (10 duplex) are wired into 10 independent cicuits.
Each circuit powers one (1) NEMA 5-20R I.G. duplex receptacle
Connections are made via numbered pigtail leads.
UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-
lation in a variety of applications with receptacles facing front, center or rear. Brackets are
engineered with multiple mounting points and include two types of hardware to facilitate
easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.
The brackets can be mounted so they are exposed for easy access or concealed beneath
the power strip for an aesthetically cleaner installation.
CERTIFICATION: ETL Listed in U.S./Canada
ORIGIN: Assembled in U.S.A. with U.S. steel chassis and global components
Ten-circuit power strip with twenty NEMA 20A insulated ground receptacles (10 duplex), for
installations requiring multiple AC power circuits, includes universal mounting brackets with
hardware.
ACS Series Model No.
ACS-2020-IG-10C-HW
AC Power Strip w/Ten Circuits
FEATURES
Certied
US Steel
S
t
r
o
n
g
e
r
.
G
r
e
e
n
e
r
.
B
e
t
t
e
r
.
Assembled
In USA
with Global
Components
A&E SPECIFICATIONS
The 20A power strip with 10 independent circuits shall be Lowell model ACS-2020-IG-10C-
HW. It shall feature 20 isolated ground (I.G.) NEMA 5-20R receptacles (10 duplex). The pow-
er strip shall terminate via a six-foot non-metallic flexible conduit with a rotating connector
and pigtail leads tagged for circuits 1-10. The power strip chassis shall measure 60” x 2
x 2 and shall be steel with black powder epoxy finish. It shall include universal mounting
brackets. The power strip shall be made in the U.S.A. with global components.
CIRCUIT 1:
One NEMA 20A I.G.
duplex receptacle
(behind conduit)
Non-metallic exible
conduit rotates in any
direction.
CIRCUIT 2:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 3:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 4:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 5:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 7:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 9:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 6:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 8:
One NEMA 20A I.G.
duplex receptacle
CIRCUIT 10:
One NEMA 20A I.G.
duplex receptacle
Mounting
brackets
Pigtail leads are
tagged according
to circuit for easy
identication.

Produkspesifikasjoner

Merke: Lowell
Kategori: Ikke kategorisert
Modell: ACS-2020-IG-10C-HW

Trenger du hjelp?

Hvis du trenger hjelp med Lowell ACS-2020-IG-10C-HW still et spørsmål nedenfor, og andre brukere vil svare deg