Metra 99-6500 Bruksanvisning

Metra Bilsett 99-6500

Les nedenfor 📖 manual på norsk for Metra 99-6500 (2 sider) i kategorien Bilsett. Denne guiden var nyttig for 5 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 3 brukere

Side 1/2
KIT COMPONENTS
99-6500
INSTALLATION
INSTRUCTIONS
TOOLS REQUIRED
Cutting tool
Socket wrench
Phillips screwdriver
KIT FEATURES
Shaft and
DIN unit
provisions
APPLICATIONS
CHRYSLER / DODGE / EAGLE / FORD / JEEP
LINCOLN / MERCURY / PLYMOUTH
VEHICLES 1974-00
(SEE INSIDE FOR SPECIFIC APPLICATIONS)
2-SHAFT HEAD UNITS: Slide the aftermarket head unit into the kit and secure with shaft
nuts. (see Fig. A)
DIN HEAD UNITS: Cut and remove the shaft supports from the Radio Housing. Slide the
DIN cage into the kit and secure by bending the metal locking tabs down. Slide the aftermarket
head unit into the cage until secure. (see Fig. B)
2
Fig. A
3
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with those screws
previously removed in the dash disassembly.
4
Fig. B
ALL VEHICLES
3
Radio Housing
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 230701

Produkspesifikasjoner

Merke: Metra
Kategori: Bilsett
Modell: 99-6500

Trenger du hjelp?

Hvis du trenger hjelp med Metra 99-6500 still et spørsmål nedenfor, og andre brukere vil svare deg