Metra AX-ADCT4 Bruksanvisning

Metra Bilsett AX-ADCT4

Les nedenfor 📖 manual på norsk for Metra AX-ADCT4 (2 sider) i kategorien Bilsett. Denne guiden var nyttig for 22 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 11.5 brukere

Last ned PDF

Side 1/2

ADCT4

44 CChhaannnneell,, AAddjjuussttaabbllee,,

LLiinnee OOuuttppuutt CCoonnvveerrtteerr ((LLOOCC))

wwiitthh BBuuiilltt--iinn AAmmpplliiffiieerr RReemmoottee GGeenneerraattoorr

The ADCT4 is is designed to convert 4 channels of speaker level audio into 4 channels of line level audio

that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers;

the optional DC4-RCA harness is required. This device will also detect the presence of an audio signal and

then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket

amplifier.

Features & Specifications: : The ADCT4 is able to handle 80 watts per channel continuous input with-

out over heating. The input circuitry is designed to correct the crossover distortion commonly found on

standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely

adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated

at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote out-

put will trigger instantaneously when the

ADCT4 detects a DC voltage on the white, left + audio input wire

above 5V or a very low audio signal. The

will shut off 30 seconds after no signal detected.

Installation: The ADCT4 should be installed on a stereo’s speaker output wires or the output wires on an

OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on

the output of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as

follows:

INPUT HARNESS: POWER HARNESS:

WHITE

= LEFT Front (+) Input YELLOW = BATTERY +12V Input

WHITE/BLACK = LEFT Front (-) Input GRAY = POWER (-) GROUND Input

GRAY = RIGHT Front (+) Input BLUE = REMOTE +12V Output

GRAY/BLACK = RIGHT Front (-) Input BLACK/WHITE = ReferenceGround(-)

GREEN = LEFT Rear (+) Input

GREEN/BLACK = LEFT Rear (-) Input

PURPLE = RIGHT Rear (+) Input

PURPLE/BLACK = RIGHT Rear (-) Input

OUTPUT HARNESS:

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front + Input

GRAY/BLACK = RIGHT Front (-) Input

GREEN = LEFT Rear (+) Input

GREEN/BLACK = LEFT Rear (-) Input

PURPLE = RIGHT Rear (+) Input

PURPLE/BLACK = RIGHT Rear (-) Input

See back of sheet for adjusting the ADCT4

for maximum performance

NOTE: Be sure that all audio input connections

are polarized or in phase with each other. That is,

the positive output wires from the audio source

need to be connected to the corresponding posi-

tive input wires of the

ADCT4. The same goes for

the negative audio wires. Failure to do this will

result in poor bass response and low quality

audio.

11--880000--222211--00993322 RREEVV.. 0044//0022//0088 wwwwww..mmeettrraaoonnlliinnee..ccoomm IINNSSTTAADDCCTT44

©© CCOOPPYYRRIIGGHHTT 22000088 MMEETTRRAA EELLEECCTTRROONNIICCSS CCOORRPPOORRAATTIIOONN

ADCT4

44 CChhaannnneell,, AAddjjuussttaabbllee,,

LLiinnee OOuuttppuutt CCoonnvveerrtteerr ((LLOOCC))

wwiitthh BBuuiilltt--iinn AAmmpplliiffiieerr RReemmoottee GGeenneerraattoorr

The ADCT4 is is designed to convert 4 channels of speaker level audio into 4 channels of line level audio

that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers;

the optional DC4-RCA harness is required. This device will also detect the presence of an audio signal and

then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket

amplifier.

Features & Specifications: : The ADCT4 is able to handle 80 watts per channel continuous input with-

out over heating. The input circuitry is designed to correct the crossover distortion commonly found on

standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely

adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated

at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote out-

put will trigger instantaneously when the

ADCT4 detects a DC voltage on the white, left + audio input wire

above 5V or a very low audio signal. The

will shut off 30 seconds after no signal detected.

Installation: The ADCT4 should be installed on a stereo’s speaker output wires or the output wires on an

OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on

the output of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as

follows:

INPUT HARNESS: POWER HARNESS:

WHITE

= LEFT Front (+) Input YELLOW = BATTERY +12V Input

WHITE/BLACK = LEFT Front (-) Input GRAY = POWER (-) GROUND Input

GRAY = RIGHT Front (+) Input BLUE = REMOTE +12V Output

GRAY/BLACK = RIGHT Front (-) Input BLACK/WHITE = ReferenceGround(-)

GREEN = LEFT Rear (+) Input

GREEN/BLACK = LEFT Rear (-) Input

PURPLE = RIGHT Rear (+) Input

PURPLE/BLACK = RIGHT Rear (-) Input

OUTPUT HARNESS:

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front + Input

GRAY/BLACK = RIGHT Front (-) Input

GREEN = LEFT Rear (+) Input

GREEN/BLACK = LEFT Rear (-) Input

PURPLE = RIGHT Rear (+) Input

PURPLE/BLACK = RIGHT Rear (-) Input

See back of sheet for adjusting the ADCT4

for maximum performance

NOTE: Be sure that all audio input connections

are polarized or in phase with each other. That is,

the positive output wires from the audio source

need to be connected to the corresponding posi-

tive input wires of the

ADCT4. The same goes for

the negative audio wires. Failure to do this will

result in poor bass response and low quality

audio.

11--880000--222211--00993322 RREEVV.. 0044//0022//0088 wwwwww..mmeettrraaoonnlliinnee..ccoomm IINNSSTTAADDCCTT44

©© CCOOPPYYRRIIGGHHTT 22000088 MMEETTRRAA EELLEECCTTRROONNIICCSS CCOORRPPOORRAATTIIOONN

Produkspesifikasjoner

Merke:	Metra
Kategori:	Bilsett
Modell:	AX-ADCT4
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Utgangseffekt:	6 W
Utgangsstrøm:	12 V
Produktfarge:	Flerfarget