Metra AXHN-1 Bruksanvisning

Metra Bilsett AXHN-1

Les nedenfor 📖 manual på norsk for Metra AXHN-1 (4 sider) i kategorien Bilsett. Denne guiden var nyttig for 4 personer og ble vurdert med 4.1 stjerner i gjennomsnitt av 2.5 brukere

Side 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AXHN-1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/22/20 INSTAXHN-1
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Small flat-blade
screwdriver • Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AXHN-1............................................. 3
Programming the AXHN-1 ..................................... 3
Setting the factory clock ....................................... 3
Troubleshooting..................................................... 3
Honda Clock Retention 2012-2014
APPLICATIONS
Provides accessory power (12-volt 10-amp)
Can be used in non-amplified, or amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
AXSWC harness included (AXSWC sold separately)
Retains balance and fade
Retains the ability to set the factory clock
Retains the factory AUX-IN jack
Micro-B USB updatable
• AXHN-1 interface • AXHN-1 harness
• 8-pin subwoofer harness
• 16-pin harness with stripped leads
HONDA
Civic * (without NAV) 2013
CR-V (without NAV) 2012-2014
* All trims except LX

Produkspesifikasjoner

Merke: Metra
Kategori: Bilsett
Modell: AXHN-1

Trenger du hjelp?

Hvis du trenger hjelp med Metra AXHN-1 still et spørsmål nedenfor, og andre brukere vil svare deg