NUVO Wright 60/4709 Bruksanvisning
Les nedenfor 📖 manual på norsk for NUVO Wright 60/4709 (2 sider) i kategorien Lampe. Denne guiden var nyttig for 17 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 9 brukere
Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/4609, 60/4709
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit breaker
or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting strap onto the outlet box by using provided 2 outlet box screws.
3. Screw the nipple A into the bushing A. Place the tube and bushing over the nipple A. Then place the xture bracket over
the tube, and place the sleeve A and decorative cover and sleeve over the nipple A, fasten the loop to the nipple A.
4. Using two pliers, twist open links at two ends of the chain as show. Hook one link to the loop and the other link to the
screw collar loop. Close the links. Place a piece of cloth between the pliers jaws and the chain link to prevent scratching
the link nish.
5. Weave xture wires up through the nipple A, through the tube, through the bushing, through the xture bracket, through
the sleeve A, through the decorative cover , through the sleeve, through the loop, through the chain, through the ring,
through the screw collar loop and through the canopy and through the nipple on the mounting strap.
6. Tie the ground wires from xture and from outlet box to the ground screw on the mounting strap. Connect the wire
without writing on it (with raised ribs) from the xture to the white wire (neutral wire) from the supply circuit. Connect
the wire with writing on it from the xture to the black wire (live wire) from the supply circuit. Cover the connections
using provided wire connectors. Position wires back inside outlet box.
7. Place the canopy over the nipple all the way to the ceiling and tighten e ring onto the screw collar loop until the th
canopy is held firmly against the ceiling.
8. Unscrew the socket rings from the sockets. Place the shades over the sockets, refasten the socket rings to secure shades.
9. Install the bulbs (Not included). Turn on the power.
A Satco Product
Produkspesifikasjoner
| Merke: | NUVO |
| Kategori: | Lampe |
| Modell: | Wright 60/4709 |
Trenger du hjelp?
Hvis du trenger hjelp med NUVO Wright 60/4709 still et spørsmål nedenfor, og andre brukere vil svare deg
Lampe NUVO Manualer
5 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
2 April 2025
2 April 2025
2 April 2025
15 Oktober 2024
15 Oktober 2024
Lampe Manualer
- Nedis
- Lutec
- Altman
- Xiaomi
- Elation
- Perfect Christmans
- Dedra
- Currey & Company
- Ansmann
- Livoo
- Exagerate
- Ledlenser
- Brennenstuhl
- Genaray
- Intermatic
Nyeste Lampe Manualer
8 April 2025
8 April 2025
6 April 2025
6 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
4 April 2025