QTX Multi-Bar Bruksanvisning

QTX belysning Multi-Bar

Les nedenfor 📖 manual på norsk for QTX Multi-Bar (5 sider) i kategorien belysning. Denne guiden var nyttig for 2 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 1.5 brukere

Side 1/5
www.avsl.com 151.545UK User Manual
Multi-Bar
LED Multi-Effects Bar with Tripod
Item ref: 151.545UK
User Manual
Complete portable lighting solution comprising 2 PAR cans, Ball effect,
laser and UV/Strobe units all powered from a main T-bar. Easily
controlled via DMX, infra-red remote control or internal auto and
sound-activated programs selectable from the rear control panel. Each
lighting fixture is angle-adjustable to distribute colour washes and
effects around the room. Supplied with 2.3m telescopic tripod stand
and carry bags making it ideal for transporting to parties and events.
In the box:
Your Multi-Bar should arrive with you in a single carton in good condition. The carton should contain
1 x T-bar with 2 RGBW PAR cans, RGBW Ball, R/G laser and UV/Strobe units attached, 1 x 2.3m Tripod
Stand, 1 x Remote Control, 1 x UK 3m IEC mains lead, 1 x T-Bar Carry Bag, 1 x Tripod Stand Carry Bag
and 1 x user manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 151.545UK User Manual
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in accordance
within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/documents/hsg95.pdf
Placement:
Open the included tripod stand legs onto the floor ensuring the thumbscrews are tightened and its
set down on a flat stable surface away from walkways or where it can be easily knocked over.
Attach the T-Bar to the top of the stand and tighten the thumbscrew ensuring its secure.
Keep the unit away from damp or dusty environments.
Ensure adequate air-flow around the fixture housings.
Ensure adequate access to controls and connections.
Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
Use a soft cloth with a neutral detergent to clean the casing as required.
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
Do not use strong solvents for cleaning the unit.
Rear panel and controls:
1.
IEC input (110-240 Vac, 50/60 Hz)
2.
Earth screw (do not remove)
3.
DMX input
4.
DMX output
5.
UV/Strobe bar input
6.
Control panel
7.
LED display
8.
Microphone
9.
Laser key
1.
2.
3.
4.
5.
6.
7.
8.
9.

Produkspesifikasjoner

Merke: QTX
Kategori: belysning
Modell: Multi-Bar

Trenger du hjelp?

Hvis du trenger hjelp med QTX Multi-Bar still et spørsmål nedenfor, og andre brukere vil svare deg