Tripp Lite SPS406HGULTRA Bruksanvisning

Tripp Lite grenuttak SPS406HGULTRA

Les nedenfor 📖 manual på norsk for Tripp Lite SPS406HGULTRA (12 sider) i kategorien grenuttak. Denne guiden var nyttig for 5 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 3 brukere

Last ned PDF

Side 1/12

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

SPS406HGULTRA

Surge Protector

Approved for Patient Care Vicinities

US Patent #7,375,939 and #8,339,759

Español 5 • Français 9

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

17-04-340-93358A.indb 1 5/5/2017 9:14:59 AM

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING!

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment within oxygen-enriched

atmospheres, or within 0.3 m (1 ft.) of a point at which an oxygen-

enriched atmosphere is intentionally vented.

CAUTION!

DO NOT connect to an ungrounded outlet. DO NOT use with extension

cords or adapters that eliminate the connection to ground. The

surge protector is designed for indoor use only. Install the surge

protector away from heat-emitting appliances such as radiators or

heat registers. DO NOT install where excessive moisture or other

conductive contaminants are present. DO NOT connect the surge

protector to the output receptacles of an Uninterruptable Power

Supply (UPS). Never install electrical wiring during a lightning storm.

AUTOMATIC OPERATION!

The surge protector includes a ground detection and power polarity

detection circuit with LED for added safety. When the surge protector

is plugged into a wall outlet, it detects whether a proper ground is

present. If a proper ground is detected, the green LED illuminates and

AC power is routed to the output receptacles. If a proper ground is not

detected, the LED does not illuminate and AC power is not routed to

the output receptacles. The surge protector also features an internal

protection that will disconnect the surge-protective component at

the end of its useful life. The surge protector will distribute AC power

and the LED will illuminate only when all of its surge suppression

components are functioning properly and it is connected to a properly

wired AC outlet.

17-04-340-93358A.indb 2 5/5/2017 9:15:00 AM

Installation

Surge Protector Care and Maintenance

Connect Your Surge Protector to Your AC Power Line

Plug the power cord into a utility outlet. The surge protector’s power cord should only

be connected to a standard 3-wire grounded 120V AC 60 Hz outlet.

Connect AC Equipment to Your Surge Protector

Plug the AC power cords of your equipment into your surge protector. Do not use

extension cords or adapters that eliminate the connection to ground. DO NOT

OVERLOAD your surge protector. Each outlet can handle a load of up to 12A, but do

not exceed a total load of more than 12A for all outlets. If the circuit breaker trips,

outlets will cease to provide power. Reduce the load on the surge protector down

to your unit’s amp rating by unplugging excess equipment, then depress the circuit

breaker button to reset and restore power.

Warning: Do not spray with liquid cleaning products.

• To clean, unplug unit and wipe with a clean cloth. Cloth may be dampened with all-

purpose cleaner.

• Check status and operation of LED, if applicable.

• Check Circuit Breaker (CB) status. Normal operation requires CB be depressed.

• Ensure mechanical integrity of case.

• Ensure mechanical integrity of power cord. It should be free of cuts, frays, and

exposed wires/conductors.

• Ensure mechanical integrity of built-in outlet safety covers, if applicable.

• Tripp Lite recommends annual inspection of its products when they are used in a

typical hospital/medical/healthcare/assisted living environment.

17-04-340-93358A.indb 3 5/5/2017 9:15:00 AM

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	grenuttak
Modell:	SPS406HGULTRA
Vekt:	1080 g
Bredde:	63.5 mm
Dybde:	46.7 mm
Høyde:	346.2 mm
Opprinnelsesland:	China
Pakkevekt:	1200 g
Sertifisering:	UL 60601-1, UL 60950-1 (USA), CAN/CSA-C22.2 No. 601.1-M90, 60950-1-03 (Canada)
Materiale:	Metall
AC-inngangsfrekvens:	50 - 60 Hz
Overstrømsbeskyttelse:	Ja
Kabellengde:	1.83 m
Produktfarge:	Hvit
Pakkedybde:	55.1 mm
Pakkehøyde:	359.9 mm
Pakkebredde:	151.9 mm
Bærekraftsertifikater:	RoHS
Kan monteres på vegg:	Ja
Antall AC outlets:	4 AC-utganger
Masterkassens (ytterkassens) GTIN (EAN/UPC):	10037332194098
Masterkassens (ytterkassens) bruttovekt:	12540 g
Masterkassens (ytterkassens) lengde:	320 mm
Produkter per masterkasse (ytterkasse):	10 stykker
Masterkassens (ytterkassens) bredde:	305.1 mm
Masterkassens (ytterkassens) høyde:	389.9 mm
AC-utgangstyper:	NEMA 5–15R
Nominell innputspenning:	120 V
Strømstøt energivurdering:	1410 J
Nominell strømoutput:	15 A