JL Audio Stealthbox SB-B-X5/10W1v3 Bruksanvisning
JL Audio
Ikke kategorisert
Stealthbox SB-B-X5/10W1v3
Les nedenfor 📖 manual på norsk for JL Audio Stealthbox SB-B-X5/10W1v3 (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 1.5 brukere
Side 1/3
INSTALLATION
DIFFICULTY:
INSTALLATION GUIDE
for the
SB-B-X5/10W1v3
SKU# 94280
2000 - 2006 BMW X5
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper installation, your new
vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio dealer. The
installation professionals employed by your dealer have the necessary tools and experience to disassemble and
reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 1 year if your system is
installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read
this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
STEP 1
Remove the flooring and the passenger side storage/woofer
cover from the vehicle.
Continued on Next Page
STEP 2
With a 10mm socket, remove the pair of nuts that are
pictured.
Remove this plastic flooring panel.
STEP 3
If equipped with the factory woofer system.
Disconnect the factory woofer system.
With a 10mm socket, remove the pair of nuts that secure the
factory woofer enclosure’s footing to the floor.
SB-B-X5/10W1v3_INSTR_SKU#011221
1
5
OUT
OF
Continued on Next Page
SB-B-X5/10W1v3_INSTR_SKU#011221
STEP 7(OPTIONAL)
If equipped with the factory woofer system.
You can use the factory footing instead of the supplied foot-
ing for the next step.
With a 5mm Allen key, remove the pair of bolts that secure
the plastic footing to the factory woofer enclosure.
STEP 6
If equipped with the factory woofer system.
Grab the top of the factory woofer enclosure and pull out.
Guide the factory fuse/relay box, up and over the factory
woofer enclosure.
STEP 5
If equipped with the factory woofer system.
With a 6mm Allen key, remove the bolt that secures the top
of the factory woofer enclosure.
STEP 4
With a 7mm socket, remove the five bolts that secure the
factory fuse/relay box.
Page 2 • JL Audio, Inc 2016
STEP 9
Place the bottom of the Stealthbox
®
into the mounting area.
Guide the factory fuse/relay box up and over the top of the
Stealthbox
®
.
Secure the plastic mounting flange to the floor area using
the two factory 10mm nuts that were removed in STEP 3.
STEP 11
Place a supplied lock washer and then flat washer onto the last
supplied 8mm x 30mm bolt. Secure the L-bracket to the top of
the Stealthbox
®
STEP 10
If equipped with the factory woofer system.
Secure the supplied L-bracket to the vehicle using the factory
bolt that was removed in STEP 5.
If not equipped with the factory woofer system, but
does have the threaded insert . Place a supplied flat
washers onto the supplied 8mm x 30mm bolt. Secure the
L-bracket to the vehicle with this bolt assembly.
If no threaded insert is found. Place a supplied flat
washer onto the supplied 8mmx30mm bolt. Place this bolt
through the L-bracket and hole. Place a supplied flat washer
and then lock washer and 8mm nut onto the bolt and
secure.
STEP 8
If equipped with the factory woofer system.
Using the factory hardware, secure the factory footing to the
Stealthbox.
If not equipped with the factory woofer system.
Using a 5mm Allen key, secure the supplied plastic footing
to the Stealthbox
®
with the pair of supplied black flat socket
screws.
Attach desired length of speaker cable to the Stealthbox
®
,
and double check the woofer for proper operation.
Produkspesifikasjoner
| Merke: | JL Audio |
| Kategori: | Ikke kategorisert |
| Modell: | Stealthbox SB-B-X5/10W1v3 |
Trenger du hjelp?
Hvis du trenger hjelp med JL Audio Stealthbox SB-B-X5/10W1v3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert JL Audio Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
9 Februar 2025
31 Desember 2025
Ikke kategorisert Manualer
- Vorago
- Mackie
- Hanseatic
- Hotpoint
- DataVideo
- Teltonika
- Ordo
- Mattel
- Soundstream
- Crucial
- Lynx
- Suzuki
- NightStick
- Sharkoon
- ASI
Nyeste Ikke kategorisert Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025